Belt Or Brush Removal & Replacement; To Remove Belt; To Replace Belt Or Brushroll - Dirt Devil M088300 Vision Turbo Owner's Manual

WARNING: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS
-
UNPLUG CLEANER BEFORE
CHANGING BELT OR BRUSHROLL.
TO REMOVE BELT
Lay cleaner flat and flip
Lift nozzle guard off.
cleaner to expose nozzle
base. Base should lay flat
and face up. To remove
nozzle guard, use Phillips
screwdriver to remove the
five (5) screws. Arrows
show location of screws.
TO REPLACE BELT OR BRUSHROLL
Place new belt in area of
Slide belt onto motorshaft.
[BELT STYLE 10
1
I
Lift and remove brushroll
Dispose of old belt.
tion (6a inset).
Rotate brushroll manually to make sure belt
brushroll without bristles.
is properly aligned.
I
I I1
I
I
Reattach nozzle guard. Replace all five (5) screws to
secure nozzle guard.
10