How To Assemble; Body To Nozzle; Upper Tool Caddy (Back); Handle (Back) And Turbo Tool Caddy (Front) Assembly - Dirt Devil M088300 Vision Turbo Owner's Manual

BODY TO NOZZLE
Slide the back panel onto
To secure, insert two (2)
base.
screws into the front of the
back panel.
UPPER TOOL CADDY (BACK)
Slide end of long hose
Align carry handle holes
onto back panel dirt tube. with holes on back
Turn counterclockwide
panel. Slide handle for-
to secure. ward. Insert two (2)
screws into the holes
and tighten until secure.
HANDLE (BACK) AND TURBO TOOL
CADDY (FRONT) ASSEMBLY
Place upper handle Attach turbo tool clip
onto upright.
into turbo tool caddy.
Place turbo tool caddy onto
Insert the two (2) screws
the front of the vacuum
into the back of the handle
midsection. and tighten, making sure
the tool caddy is attached.