Do not install in locations where salt damage may
occur, or where corrosive, neutral, or reductive
gases are present.
This may cause malfunctions.
Do not scratch, damage, process, excessively
bend, pull, twist or bundle the power cable, and
do not place heavy objects onto it or trap it.
Doing so may damage the power cable, causing ﬁ res or
Do not attempt any disassembly or modification of
the unit that is not expressly stated in this manual.
Doing so may result in ﬁ res, electric shocks or injuries.
Do not use in a hot location such as a shower
room, where condensation may form on the unit,
or where water may splash directly onto the unit.
Do not use in the
This may cause electric shocks or malfunctions.
Do not install when the product (power cable) is
Doing so may result in electric shocks.
The following may lead to death or serious personal
injury if the unit is handled incorrectly.
Electrical wiring work should be done by a certiﬁ ed
professional in conformance with the technical
standards for the equipment or ofﬁ cial standards.
Incorrect wiring can cause electric shocks and ﬁ res.
This hand dryer must have its own independent
branch circuit using AWG #12 or #14 copper wire.
The circuit should be equipped with a Ground Fault
Interrupter and a 120 Vac, 20 amp circuit breaker
for AWG #12 wire, or a 120 Vac, 15 amp circuit
breaker for AWG #14 wire.
Use 120 Vac power.
Using the incorrect power supply may cause ﬁ res, fumes,
electric shocks or malfunctions.
Be sure to install a ground-fault circuit interrupter.
Not doing so may result in electric shocks.
A means for disconnection must be incorporated
in the ﬁxed wiring in accordance with the wiring
The following may lead to injury or damage to
property if the unit is handled incorrectly.
Install securely in a location strong enough to
support the weight of the unit.
Injuries may be caused if the unit falls off the wall.
Wear gloves when installing the unit.
Not doing so may result in injuries.
− 2 −