Machine Faults - Monarch 9800 Series Operator's Handbook Manual

574
575
600
601
602
611
612
613
614
615
616
618
M a c h i n e F a u l t s
Errors 700 to 765 happen when there is a problem with the printer.
Error
700
701
702
6-12 Troubleshooting
Batch data in check digit scheme doesn't fit the format,
or, the field contains blanks.
The graphic included in your format could not be found.
Imaging error because the batch was refused.
An error occurred while the batch was imaging.
The batch was not found during imaging.
Font, bar code, or density in the batch doesn't fit the
format.
Batch data is missing or doesn't match the format.
Reference point off tag.
Portion of field off tag.
Bar code width is greater than 16 inches, or keywords
on PDF 417 bar code exceed 928.
A bad dot falls on a bar code and the dot cannot be
shifted. Call Customer Service to order a new
printhead or printhead kit.
Magnification must be 1 to 7.
Description/Action
An error is pending, and the printer cannot continue
with the batch.
Printer received a command that it cannot execute
while it is running.
Check your printer's SETUP settings.
Rev. C 3/99