Using A Bi-Directional Ieee-1284 Compliant Parallel Cable To Connect The Mfc To The Pc (Using Windows ® 95, 98, 98Se, Windows Nt ® Workstation Version 4.0 And Windows ® 2000 Professional); Computer Requirements - Brother MFC-830 Owner's Manual

Computer Requirements

The following are the minimum computer requirements you need to set up and operate the MFC
drivers.
®
Windows
Operating
System
95, 98, 98SE
NT 4.0
Workstation
2000
Professional
Use only a shielded parallel interface cable that is IEEE-1284 compliant and/or a
USB cable that is no longer than 6 feet long ( 1.8 meters).
Using a bi-directional IEEE-1284 compliant
parallel cable to Connect the MFC to the PC
(Using Windows
Windows NT
Windows ®
To install the software using Windows NT
2000 Professional, you must be logged on as the Administrator.
1
Unplug the MFC power cord from the electrical outlet before connecting the parallel interface
cable.
2
Make sure the computer is turned off and unplugged from the electrical power before you
connect the interface cable.
3
Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire
clips.
When you connect the MFC to your computer you must use the included Brother
bi-directional IEEE-1284 compliant parallel cable.
COMPUTER REQUIREMENTS
Speed
(or Higher)
Pentium 75MHz
Pentium 75MHz
Pentium 133MHz
® 95, 98, 98SE,
® Workstation Version 4.0 and
2000 Professional)
IMPORTANT
Setting Up the MFC and PC to Work Together
RAM
24MB (32MB rec.)
32MB (64MB rec.)
64MB (128MB rec.)
®
Workstation Version 4.0 or Windows
HD CD-ROM
Space Speed
50MB 2X
50MB 2X
50MB 2X
®
77