Installing The Driver & Software; For Parallel Interface Cable Users ® (For Windows 95/98/98Se/Me/2000 Professional/Xp); 95/98/98Se/Me Users Only - Brother 5200c - MFC Color Inkjet Quick Setup Manual

Step 2
For Parallel Interface Cable Users
(For Windows
For Windows
Make sure that you followed the instructions in
F
When this screen appears, connect the
parallel interface cable to your PC, and then
connect it to the MFC.
Turn on the MFC by plugging in the power
cord.
.
G
Click Next.
22
Installing the Driver & Software
®
95/98/98SE/Me/2000 Professional/XP)
®

95/98/98SE/Me Users Only

1 E
to on pages 19 to 21.
H
The README.WRI file will be displayed.
Please read this file for troubleshooting
information and then close the file to
continue installation.
I
Click Finish to restart your computer.
J
After the computer restarts, the installation
of the Brother driver will automatically start.
Follow the instructions on the screen.
K
Click Yes to have the Brother MFL-Pro
Control Center loaded each time Windows
is started. The Control Center will appear as
an icon in the task tray.
If you click No the Scan keys on the MFC
will be disabled. *3
*3 Even if you select NO, later you will be able to
launch the Brother Control Center to use the
Scan to key. See AutoLoad the Brother Control
Center, Chapter 14 in the On-Line
Documentation (User's Guide) on the CD-ROM.
The Brother PC fax, Printer and Scanner
drivers have been installed and the
installation is now complete.