On Hook Dialling - Brother MFC-830 Owner's Manual

Mute (Only for MFC-840)
1
Press Mute/Tel to put a call on hold.
2
You can put down the handset without disconnecting the call.
3
Pick up the machine's handset to release the call from hold. Picking up an extension handset will
not release the call from hold.
Pause
Press Redial/Pause to insert a pause between digits to be dialled.
If your fax machine is connected to a PABX, you may need to insert an additional
number prefix (e.g. "9") and a "pause" before each fax or telephone number to
gain access to the outside line. When you press Redial/Pause, a dash "-" will
appear on the display. By storing a pause, you can create a delay of 3.5 seconds.

On Hook Dialling

1
Dial the number by using the dial pad or One Touch Dial key, or Speed Dial and # then two-
digit Speed Dial number.
2
The number you are dialling, or the name you have stored for One Touch or Speed Dial is
displayed on the LCD.
3
Press Start.
4
Pick up the handset (and press Tel for MFC-830) when you hear the other end from the monitor
speaker.
When you make a call by pressing Start after dialling, you can listen to the other
end of the line from the monitor speaker, but they can't hear you unless you pick
up the handset (and press Tel for MFC-830 ).
If you accidentally press Tel before lifting the handset, the call will be disconnected.
Search
You can search for names you have stored in One Touch and Speed Dial
memories. Names are stored alphabetically. (See Storing One Touch Dial Numbers and Storing
Speed Dial Numbers in Chapter 1.)
1
Press Search/Speed Dial, then enter the first letter of the name you're looking for.
2
Press or to search the memory.
3
When the screen displays the name you want to call,
press Start to begin dialling.
4
Pick up the handset (and press Tel for MFC-830) when the other party answers. (The speaker
works only one way; the other party won't be able to hear you unless you pick up the handset.)
5
When the call is over, hang up.
30
Chapter 4