Belling IH613 User Manual And Installation Manual page 16

USING THE HOB - 13AMP VERSIONS
13 AMP OPERATION
Your hob has been designed to allow you
to connect to a 13Amp fused spur and is
suitable for a variety of installations not
possible with conventional electric hobs,
such as direct replacement for a gas hob
without the need to install a 32 Amp
cooker socket, thus eliminating the need
for an expensive rewire of the kitchen.
How it works
Each time you operate the hob, the total
power level of the hob is calculated.
If the total power requested reaches
2.8 kW the energy management system
warns you that the limit is reached. Sig-
nalled by a flashing display "r" in the zone
Set Cook Zone
Left Hand Front
Left Hand Rear
Right Hand Front
Right Hand Rear
USING THE HOB
13 Amp Supply Power Setting Examples
Examples Of Possible Power Setting Combinations
9
9
Off Off
Off Off
window (Lasts for 3 seconds ) and an
audible "Beep". The hob cook zones can
be used in any combination or setting until
the 2.8 kW power setting is reached. (See
Tables Below)
Any further power increase is not
allowed!
To use any new zones requires you to
reduce the power of one of the other
selected cook zones.
Note: With one zone on 'P' or '9', it is only
possible to use zone 3
P P
P 1
1
Off
P 8
8 8
8 8
Off 8