Example: To Store Column Data In List Memory; Recalling Data From Memory To A Spreadsheet - Casio FX-CG20 AU User Manual

u Example: To store column data in list memory
1. In a single column, select the range of cells you want to store in list memory.
• For example, you could select A1:A10.
2. Press 6( g) 3(STORE) 2(LIST).
• This will display a screen like the one shown to the right.
The "Cell Range" setting will show the range of cells you
selected in step 1.
3. Press c to move the highlighting to "List[1~26]".
4. Input the List number (1 to 26) of the list memory where you want to store the data and then
press w.
• Performing the next step will overwrite any data currently stored under the list memory
number you specified here with the data in the range of cells specified by "Cell Range".
5. Press 6(EXE) or the w key to store the data.
k Recalling Data from Memory to a Spreadsheet
The following table shows an overview of the recall operations for each type of memory. For
details about each operation, see the example operations following the table.
Memory Type
List Memory
(List 1 ~ List 26)
File Memory
(File 1 ~ File 6)
Matrix Memory
(Mat A ~ Mat Z)
Vector Memory
(Vct A ~ Vct Z)
You can recall data from a specified list memory to a range of
cells in a single row or a single column. While the first cell of
the range in a single row or single column is selected, press
6( g) 4(RECALL) 1(LIST), and then specify the list number on
the screen that appears.
Whether the data is recalled in a column direction or row direction
depends on the Setup screen's "Move" setting (page 1-35).
You can recall data from a specified file memory to the spreadsheet.
Select the cell you want to be the upper left corner of the recalled
data and then press 6( g) 4(RECALL) 2(FILE). Next, specify
the file memory number on the screen that appears.
You can recall data from a specified matrix memory to the
spreadsheet. Select the cell you want to be the upper left corner
of the recalled data and then press 6( g) 4(RECALL) 3(MAT).
Next, specify the matrix name on the screen that appears.
You can recall data from a specified vector memory to a range
of cells in a single row or a single column. While the first cell
of the range in a single row or single column is selected, press
6( g)4(RECALL)4(VCT), and then specify the vector name on
the screen that appears.
9-35
Recall Operation