Using Sample Data Memory - Casio FX-CG10 Software User's Manual

9. Using Sample Data Memory

Performing an EA-200 sampling operation from the E-Con2 mode causes sampled results
to be stored in the "current data area" of E-Con2 memory. Separate data is saved for each
channel, and the data for a particular channel in the current data area is called that channel's
"current data".
Any time you perform a sampling operation, the current data of the channel(s) you use is
replaced by the newly sampled data. If you want to save a set of current data and keep it
from being replaced by a new sampling operation, save the data in sample data memory
under a different file name.
k Managing Sample Data Files
• To save current sample data to a file
1. On the E-Con2 main menu (page -1), press 5(GRAPH).
• This displays the Graph Mode screen.
• For details about the Graph Mode screen, see "Using the Graph Analysis Tools to
Graph Data" (page -35).
2. Press 2(DATA).
• This displays the Sampling Data List screen.
3. Use the f and c cursor keys to move the highlighting to the current data file you want
to save, and then press 2(SAVE).
• This displays the screen for inputting a data name.
Using Sample Data Memory
List of current data files
"cd" stands for "current data". The text on
the right side of the colon indicates the
channel name.
20100801 20100801
-33
Sampling Data List Screen
Graph Mode Screen