Casio FX-CG20 AU User Manual page 550

When you see
It means this:
this message:
First configure • You are trying to run an animation
animation without first configuring its settings.
settings. • You are trying to execute an Add
Table command without first
configuring animation settings.
Cannot Add • The point you selected for an Add
Animation Animation or Replace Animation
command operation cannot be used
in an animation because it is locked,
etc.
• The point you selected for an Add
Animation or Replace Animation
command operation cannot be used
in an animation because it is already
being used in the animation you are
configuring or in another animation.
Select the You are trying to execute the Add Table
applicable command without first selecting the
measurement appropriate measurement icon.
icon.
First configure You tried to execute the Display Table
animation command without generating an
settings and animation table.
create a table.
Create at least You are attempting to execute a surface
one figure with area calculation (K(Option) – 7:Area
a fill color. Calc) when there is no figure on the
screen with a fill color.
So you need to do this:
Configure animation settings and try
again.
Select a point to which animation can
be added and try again.
Select the icon of a measurement
that can be added to an animation
table.
Generate an animation table first.
Draw a figure with a fill color and try
again.
α
-11