OHAUS Scout Pro Balance Quick Start Manual

Quick Start Guide
PREPARATION FOR USE
Release Shipping Lock on top of the balance
Turn the pointer 90° counter-clockwise.
Install the Platform
Rectangular platform: Place diagonally on sub-
platform and rotate counter-clockwise until it locks.
Round platform: Set straight down on subplatform.
Connect Power
Ensure voltage identification label matches
local line voltage. If not, do not connect the unit.
Contact Ohaus or your dealer.
Battery Installation
Install the Four "AA" batteries with polarity
as shown in the battery compartment.
SELECTING THE LOCATION:
Avoid excessive air current, vibrations, heat sources, or rapid temperature changes.

SAFETY PRECAUTIONS

Before plugging in the balance, verify that local power supply matches voltage printed
•
on power adapter. (Use only the adapter provided with the balance.)
Disconnect the balance from the power supply when cleaning.
•
Do not operate this product in hazardous or unstable environments.
•
Do not drop loads on the pan.
•
Use only approved accessories and peripherals, as available.
•
Operate the product only under ambient conditions specified in the Instruction Manual.
•
Service should be performed by authorized personnel only.
•
Ohaus Corporation www.ohaus.com
Unlocked
position
Draft Shield models:
on top and rotate it until it faces forward.
Adapter jack
Place on a firm, steady surface with sufficient space.
i
®
Scout Pro Balance
Locked
position
Pointer
Position draft shield
Balances with leveling
feet and bubble must
be leveled before
using. (Bubble is at
rear, next to AC
Adapter Input Jack.)
®
Scout Pro Balance Quick Start Guide
Subplatform