OHAUS Scout Pro Faq

Topic:

How to Turn On Units of Measure

Enabling or disabling the units of measure can be accomplished in the UNITS menu.
You can also click
main menu) and EN-13 (entering the UNIT menu).
Note1: during MENU navigation, use the following
buttons to initiate selections YES or NO.
Note2: depending on the region,the [ON/ZERO
Off] button may be designated as [ON/ 0/T Off].
1. With the scale (and lock switch) OFF: press
and hold [ON/ZERO Off] (approx. 5 seconds)
until the scale flashes MENU.
2. Release the button once MENU is displayed
After releasing the button, the scale will
display CAL.
3. Press [PRINT Unit] repeatedly until UNIT is
displayed.
4. Once UNIT is displayed, press [ON/ZERO Off]
to select this menu.
For any further questions, please e-mail us at techsupport@ohaus.com, or call us at 973-377-9000 #2 or ext. 7852 from 8AM to 5PM EST
This list compiles frequently asked questions about the Scout Pro:
a) How do I turn on the units of measure
b) How do I switch between units of measure
c) How do I calibrate my unit
here for the user manual -- refer to Section 3: Operations, pages EN-11 (navigating the
Scout Pro FAQ
YES
. . .
NO
AppNotes.v20170811_ AG