StreamLight strion Operating Instructions page 3
Hide thumbs
Also See for strion:
- Operating instructions manual (19 pages) ,
- Operating instructions (5 pages) ,
- User manual
Advertisement
E.
Do not abuse the cord. Never carry the charger by the cord or yank the cord to
disconnect it from a receptacle. Do not use a damaged charger.
F.
Plug AC charger directly into an electrical outlet. Do not use an extension cord.
G.
Do not put any metal objects onto the charging terminals located in the charge
holder.
H.
Do not try to repair the unit or charger yourself. Take it to a qualified service facility
or return it to the factory.
I.
Use only battery #74175 (see parts list). The contact arrangement in the flashlight
precludes the use of other batteries. Recycle worn out or damaged batteries
properly. Do not attempt to incinerate the battery as it may explode in a fire.
Handle the battery carefully and never allow it to short circuit.
J.
Use of this product for other than a lighting device is not recommended.
Streamlight
K.
specifically disclaims liability for other than recommended use.
CHARGER FACTS
CHARGER MOUNTING
•
The charger should never be mounted against any heat sensitive surface.
•
The most secure mounting position is with the Strion
head up.
•
Before drilling any holes, make sure there is room to insert and remove the
flashlight.
•
Two (2) self-tapping screws are included to mount the charger.
Use a 1/8th" drill bit.
LED CHARGE INDICATOR
•
With the Strion
indicating a proper charge path. It may take a second or two for the LED to light
when the Strion
•
Charging...LED is steady.
•
Charged...LED pulses shortly every second.
•
Charge time is approximately 2.5 hours for Strion
IMPORTANT:
prevents charge outside that range.
•
Temperatures outside this range may also cause the charge indicator to temporarily
function abnormally.
•
It is normal for the indicator to switch between steady and blink as the battery is
"topped off".
/Strion
LED inserted properly the LED on the charger should light,
®
®
/Strion
LED is first inserted.
®
®
Charging temperature is between 20°F and 115°F. A safety circuit
/Strion
®
®
and 3hrs for the Strion
®
LED vertical and
LED.
®
Advertisement
