Accessing Computer Setup; Computer Setup Defaults - HP Compaq Presario,Presario V2600 Maintenance And Service Manual

Troubleshooting

Accessing Computer Setup

The information and settings in Computer Setup are accessed
from the File, Security, Tools, and Advanced menus.
1. Open Computer Setup by turning on or restarting the
computer. Press
displayed in the lower-left corner of the screen.
❏
❏
❏
2. Select the File, Security, Tools, or Advanced menu.
3. To exit Computer Setup, choose one of the following:
❏
❏
Your preferences are set when you exit Computer Setup and go
into effect when the computer restarts.

Computer Setup Defaults

To restore all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
computer. Press
displayed in the lower-left corner of the screen.
❏
❏
2. Use the arrow keys to select File > Restore defaults.
3. Select the Restore Defaults check box.
2–2
f10
To change the language, press
To view navigation information, press
To return to the Computer Setup menu, press
To exit without saving any changes, use the arrow keys to
select File > Ignore changes and exit, and then follow
the instructions on the screen.
To exit and save all the settings you have entered, use the
arrow keys to select File > Save changes and exit, and
then follow the instructions on the screen.
f10
To change the language, press
To view navigation information, press
while the F10 = Based Setup message is
f2
while the F10 = Based Setup message is
f2
Maintenance and Service Guide
.
.
f1
esc
.
.
f1
.