Hemming - Empisal Dress Maker 270D Instruction Manual

HEMMING

(Optional)
1. Raise the foot and the needle to its highest position. Replace the foot with the picot foot.
2. Fold over the fabric edge by about 3 mm and place it under the foot. Secure the folded
edge with a few stitches. Slide the hem of your project into the picot foot by pulling the
threads.
3. Lower the foot and sew the hem.
4. While sewing fold the fabric to the left a little and guide it into the hemmer foot.
5. Make sure that the fabric does not move under the right half of the foot. The fabric must
be fed into the scroll of the hemmer sufficiently so that the project edge runs freely
through the groove under the foot.
Only suitable materials can be used and some practice may be necessary to achieve
the best results.
3 mm
1 mm
20 mm
- 27 -