Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Empisal ESM2900
Summary of Contents for Empisal ESM2900
- Page 11 01. STRAIGHT STITCH 02. LEFT POSITION, STRAIGHT STITCH 03. QUILT STITCH, LIKE HAND SEWN 04. TRIPLE STRAIGHT STITCH 05. STEM STITCH FOR STRETCH FABRICS 06. ZIGZAG STITCHING 07~11. BUTTONHOLES 12. 3-STEP ZIGZAG 13. SATIN STITCH 14. RICK-RACK 15. OVERLOCK 16. DOUBLE OVERLOCK 17.
- Page 14 1. Raise presser foot lever. 2. Press the needle up / down button or rotate the handwheel toward you to raise the needle in the position. 3. Place a spool of thread onto the spool pin and secure with the proper size spool cap (see page 11).
- Page 23 This stitch will sew without stitches showing on right side of fabric. Note: If too much of the stitching shows on the right side of the fabric, change to a narrower stitch width or move the guide on the foot to the right. If the zigzag does not meet the fold, widen the stitch width or move the guide on the foot to the left.
- Page 30 Interesting decorative stitches can be produced by twin needle sewing application with two different colors of thread. Always making test sewing to help you determine the most appropriate setting for best sewing result. 1. Set stitch width no more than 3.5mm. 2 .Insert twin needle.
Need help?
Do you have a question about the ESM2900 and is the answer not in the manual?
Questions and answers
Hi , please help how do I use overlock stitch on empisal esm2900 , and button hole when I turn it on the stitch sign it just keep flicking don't sew
To use the overlock stitch on the Empisal ESM2900:
1. Select Stitch No.15 (Overlock) or No.16 (Double Overlock) from the stitch options.
2. Raise the presser foot lever.
3. Raise the needle using the needle up/down button or by turning the handwheel toward you.
4. Place a spool of thread on the spool pin and secure it with the correct size spool cap.
5. Thread the machine following the upper threading path:
- Pass thread into the thread guide and snap it between the guide and plate.
- Bring it down the right channel, then up the left channel.
- Pull the thread through the take-up lever from left to right and down to the needle.
6. Begin sewing along the edge of the fabric for a clean finish.
To use the buttonhole function:
1. Select one of the buttonhole stitches (Stitch No.07 to No.11).
2. Follow the same threading steps as above.
3. Attach the buttonhole presser foot.
4. Place the fabric under the presser foot and align it as needed.
5. Lower the buttonhole lever if required.
6. Start sewing; the machine will create the buttonhole in the selected pattern.
Note: Twin needle use is not recommended with buttonhole stitches (No.7–11).
This answer is automatically generated
How to fix if a handwill is stiff to turn
How do I remove the bobin