Fujitsu AUU9RLF Design & Technical Manual page 88

FUNCTION SETTING
3) Pressing the SET TIME < button or the SET TIME > button, to select the function number.
4) Pressing the SET TEMP. V button or the SET TEMP. Λ button, to select the setting number.
The display flashes during setting number selection.
5) Pressing the TIMER SET button, confirm the setting.
(The data will be transferred to the indoor unit.)
● When the data was not set up on the indoor
unit (-- is displayed.)
● Set up the data again according to the
procedure in step 5), 6) above.
FUNCTION DETAILS
Refer to 13-5. FUNCTION DETAILS
Function number
Setting number
Ex.) Function number : 30, Setting number : 01
NOT GOOD
When the data was normally set up on the indoor
unit
(Flashing display changes to illuminated display.)
- (01 - 84) -
GOOD