Fujitsu AUU9RLF Design & Technical Manual page 20

Pattern C
1) Modify the remote controller cable as per below methods.
● Use a tool to cut off the terminal on the end of the remote controller cable and then remove
the insulation from the cut end of the cable as shown in Fig.
● Connect the remote controller cable and connecting cable as shown in Fig.
● Be sure to insulate the connection between the cables.
Connecting
cable
White
Red
Remote controller
cable
2) Method of connecting remote controller cable
● Connecting cable made by above-mentioned 1) is connected with PCB of Indoor unit.
Connecting
cable
Remote controller
cable
White
Red
Black
Insulated
connection
Black
CN6
Indoor unit PCB
- (01 - 16) -