Uniden UDR744 Owner's Manual page 22

Main Screen
Camera Setup
(see page 22)
Recording
Setup
(see page 22)
System Settings
(see page 28)
22
Sub-Screens
Pairing (see page 23) This system comes with cameras already paired. Use
ON/OFF
(see page 24)
Resolution
(see page 25)
Duration
(see page 26)
Schedule Recording
(see page 27)
File Overwrite
(see page 22)
Date & Time
(see page 29)
Time Zone
(see page 30)
Language
(see page 31)
Default Settings
(see page 22)
Format SD Card
(see page 32)
Information
(see page 32)
What it Does
Pairing to assign these cameras to different channels
or to pair additional new cameras to the monitor.
Makes the cameras visible to the monitor.
Adjusts the video quality of each camera.
Set the length of time the camera records once motion
sensitivity tiggers the camera to record. Choices are
15 seconds, 30 seconds, or 1 minute (Default - 15
seconds)
Set up a schedule for pre-determined recording times
and lengths.
Overwrites the oldest recorded data on the SD card
once the card is full.
• Time Setting. Set the current time (including
Daylight Savings Time).
• Time Zone. Set the time zone for your UDR744
system.
• Set the time zone for your UDR744 system.
• Enable/Disable Daylight Savings Time
Changes language setting for the monitor (English,
French or Spanish).
Restores the UDR744 to default settings..
Reformats the SD card and deletes all existing data.
Displays firmware information for the monitor and
each camera.