Sanyo FWZV475F Owner's Manual page 75

Playback (cont'd)
1
Parental Lock (Default: OFF)
Some DVD-video feature a parental lock level. Playback
will stop if the ratings exceed the levels you set, it will
require you to enter a password before the disc will
playback. This feature prevents your children from viewing
inappropriate material.
Use [K / L] to select the desired level, then press [OK].
Parental Lock
OFF
8 [Adult]
7 [NC 17]
6 [R]
5 [PG R]
4 [PG 13]
3 [PG]
2 [G]
1 [Kid Safe]
If a password has not been set yet, proceed to A .
If a password has been set already, proceed to B .
Note
Parental lock function may not be available to some
•
discs.
With some DVD, it may be difficult to find if they are
•
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you have
set.
Record the password in case you forget it.
•
If there is a DVD in the unit when you set up the parental
•
lock, press [A] to activate the parental lock level.
A
A password has not been set yet.
Use [K / L] to select "Yes". Use [the Number buttons] to
enter a new password except for 4737, then press [OK].
Change Password?
Yes
No
Your setting will be activated.
B
A password has been set already.
Use [the Number buttons] to enter the current
•
password.
Password Input
Your setting will be activated.
If you want to change password, use [K / L] to
•
select "Yes". Use [the Number buttons] to enter a
new password except for 4737, then press [OK].
Change Password?
Yes
Yes
No
Your setting will be activated.
SETUPS
Password Input
Yes
<change the password>
Password Input
Note
Press [CLEAR] to erase numbers entered incorrectly.
•
When you forget the password or you want to clear all
•
settings in "Parental Lock" menu, enter 4737 using [the
Number buttons] in password input window. Password
will be cleared and parental levels will be set to "OFF".
2
Audio Out
Choose the appropriate audio setting for your external
device.
It will only affect a disc playback.
Use [K / L] to select a desired item, then press [OK].
Audio Out
A
Dynamic Range Control
B
PCM
Dolby Digital
C
A
Dynamic Range Control (Default : ON)
Set to "ON" to compress the range between soft and
loud sounds.
Use [K / L] to select a setting, then press [OK].
Dynamic Range Control
ON
OFF
Your setting will be activated.
Note
Dynamic range control function is available only on the
•
discs which are recorded in the Dolby Digital format.
B
PCM (Default : 48kHz)
Use [K / L] to select a setting, then press [OK].
PCM
48kHz
96kHz
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible with
96kHz PCM, select "48kHz". 96kHz sound will
be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select "96kHz". 96kHz sound will
be output.
Note
When playing back disc with copyright protection
Even if you select "96kHz", the sound will be down
•
sampled at 48kHz.
Instructions continue on the next page.
EN EN 75 75