Only cassettes marked can be used with this video cassette recorder. As an E ® Partner, NERGY SANYO has determined that this product or product model meets the E ® NERGY guidelines for energy efficiency. Please read this manual carefully before connecting your DVD+VCR and operating it for the first time.
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of...
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
Table of Contents Introduction Safety Precautions ......2 IMPORTANT SAFETY INSTRUCTIONS ..3 Table of Contents .
Before Use Playable Discs (8 cm/12 cm disc) Audio CD (8 cm/12 cm disc) In addition, this unit can play a CD-R or CD-RW that contains audio titles or MP3 files. Notes – Depending on the conditions of the recording equip- ment or the CD-R/RW disc itself, some CD-R/RW discs cannot be played on the unit.
Before Use (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback.
Front Panel Disc Tray (DVD deck) Insert a disc here. Point the DVD+VCR remote control here. Shows the current status of the DVD+VCR. OPEN/CLOSE (Z Z ) Opens or closes the disc tray. STOP (x x ) Stops playback of disc. PLAY (B B ) Starts playback of a disc in the DVD deck.
Display Window The DVD deck is selected. A disc is in the DVD deck. (Lights when a disc is in the DVD deck and Flashes when no disc.) Indicates repeat mode. DVD to VCR copy is in progress. DVD+VCR is in timer recording or a timer recording is programmed.(VCR part only) A cassette is in the VCR deck.
Remote Control DVD/VCR select button Select the output source (DVD or VCR) to view on the TV screen. POWER Switches DVD+VCR ON and OFF. TV/VCR To view channels selected by the VCR tuner or by the TV tuner. DISPLAY, CLK/CNT Accesses On-Screen display.
Rear Panel DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. VHS IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right)) Connect the audio/video output of an external source (Audio system, TV/Monitor, Another VCR). S-VIDEO OUT (DVD OUT) Connect to a S-Video Input on TV.
Connections Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD+VCR. Use connections described on pages 11-13. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
Connections (Continued) Basic TV Connections Make one of the following connections, depending on the capabilities of your existing equipment. RF coaxial connection Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the 75-ohm Coaxial Cable supplied (R).
Connections (Continued) Optional, Preferred TV Connections Note You can ONLY listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.) Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround Connect the Left and Right AUDIO OUT (or DVD/VCR...
Before Operation - VCR Part On-Screen Display (OSD) Some of these functions will be displayed every time the VCR is operated. ❶ ❷ ❸ ❹ PLAY HI-FI CH 4 STEREO JUL 5 , SAT 2:15 PM ❻ ❼ ❶ TAPE SPEED DISPLAY Shows the current tape speed.
Before Operation - VCR Part (Continued) Setting the VCR Setup Menu Press MENU and the MAIN menu will appear. Press v v /V V to select the SETUP menu, then press SELECT/ENTER. The SETUP menu will appear. Press v v /V V to choose a desired option on the SETUP menu.
Before Operation - VCR Part (Continued) Setting the Clock The DVD+VCR gives you two ways to set the time and date: the Auto Clock Feature or manually. The Auto Clock Feature enables the DVD+VCR to set up the clock when the DVD+VCR is turned off. Things to know before starting The clock uses the 12-hour system.
Before Operation - DVD Part General Explanation This manual gives the basic instructions for operating the DVD+VCR. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD+VCR or is not available on the disc.
Before Operation - DVD Part (Continued) Initial Settings You can set your own Personal Preferences on the DVD+VCR. General Operation Press SETUP. The setup menu appears. Original Disc Audio Disc Subtitle English Disc Menu French Rating German Country Code Spanish TV Aspect Italian Menu Language...
Before Operation - DVD Part (Continued) Sound Digital Audio Output Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL/PCM: Select DOLBY DIGITAL/PCM if you connected the DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder).
Before Operation - DVD Part (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc. These scenes are rated from 1 to 8, and alternatively, more suitable scenes are available for selection on some discs.
Operation with tape Normal Playback Preparation: Turn on the TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO. Set the Output Source to VCR as shown in Setting the Output Source on page 6.
Operation with tape(Continued) Normal Recording Preparation: Turn on the power of both the DVD+VCR and TV. Tune the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO.
Operation with tape(Continued) Use V V to choose the SPEED option. 1 1 0 0 Use b b /B B to choose the desired recording speed (AUTO, SP or SLP). AUTO mode determines how much tape is left and switches speed from SP to SLP, if necessary, to complete recording the program.
Operation with tape (Continued) Instant Timer Recording Instant Timer Recording allows you to make a recording easily of a preset length without using the program timer. Preparation: Turn on the power of both the DVD+VCR and the TV. Be sure the TV is tuned to the DVD+VCR output channel (3 or 4). If a direct VIDEO/AUDIO connection is made between the DVD+VCR and the TV, set the TV’s source selector to VIDEO.
Operation with tape (Continued) VHS Hi-Fi Stereo System/ MTS Broadcast This DVD+VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The informa- tion below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode. Playback with Hi-Fi Stereo Audio Sound A stereo TV with AUDIO/VIDEO input jacks or a stereo audio system is required for true stereo playback.
Operation with tape (Continued) Tape Counter Memory Feature Real-Time Counter Shows length of tape run in hours, minutes, and sec- onds. Press CLK/CNT to select the real-time counter display. Every press of CLK/CNT changes the TV screen as illustrated below. 2:15 AM 0:05:25 CLOCK...
Operation with DVD Playing DVD Playback Setup Turn on the TV and select the video input source con- nected to the DVD+VCR. Audio system: Turn on the audio system and select the input source connected to the DVD+VCR. Set the Output Source to DVD as shown in Setting the Output Source on page 6.
Operation with DVD (Continued) General Features (continued) Still Picture and Frame-by-frame playback 1 Press PAUSE/STEP (X) during playback. The DVD+VCR will now go into PAUSE mode. 2 With a DVD, you can advance the picture frame by frame by pressing PAUSE/STEP (X) repeatedly on the remote control.
Operation with DVD (Continued) General Features (Continued) Zoom The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the magnification level increases up to six steps.
Operation with Audio CD and MP3 Discs Playing an Audio CD and MP3 discs The DVD+VCR can play MP3 formatted recordings on CD-ROM, CD-R, or CD-RW discs. Before playing MP3 recordings, read the notes on MP3 Discs on page 32. Insert a disc and close the tray.
Programmed Playback Programmed Playback with Audio CD and MP3 Discs Program allows you to store your favorite tracks for a particular disc in the player memory. Program can contain 32 tracks (Audio CD) or 60 tracks (MP3 disc). Insert the disc and close the tray. The menu is displayed on the TV screen.
Additional Information - DVD Part Video Mode Setting With certain discs, the playback picture may be flick- ering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom The power cord is disconnected. No power. The power is on, but No disc is inserted. No tape is inserted. the DVD+VCR does not work.
Troubleshooting (Continued) Cause Symptom Some channels are Those channels were deleted with the skipped over when CH. ADD/DEL option. using CH/TRK (v/V) Picture and sound of Antenna or cables are loose. broadcasting channel are weak or missing. Wrong TUNING BAND option is being used.
Language Code List Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu” (See page 18). Language Code Language Abkhazian 6566 Fiji Afar 6565 Finnish Afrikaans 6570 French Albanian 8381 Frisian Amharic 6577 Galician Arabic 6582 Georgian...
Specifications General Power requirements Power consumption Dimensions (approx.) Mass (approx.) Operating temperature Operating humidity Signal system Inputs ANTENNA IN VHS VIDEO IN VHS AUDIO IN Outputs VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT Audio output (digital audio) Audio output (analog audio) RF OUT VCR Specifications Head system...