Information on VCR Functions
Caution on using S-video, component or HDMI connection for VCR:
Only the playback audio / video are available with these connections.
•
Under the condition listed below, the playback image cannot be viewed. Use the standard video connection, in such
•
case;
- during DVD recording.
HDMI video resolution cannot be changed when the unit is in VCR mode.
•
Playback
Press [VCR] first.
1) Insert a prerecorded tape (refer to page 24 on
"How to Insert a Disc / Cassette Tape").
2) Press [ B] to start playback.
3) Press [C] to stop playback.
To pause playback:
Press [F].
Playback will pause and sound will be muted.
To resume playback:
Press [ B].
Note
When a cassette tape without erase-protection tab is
•
inserted, the unit will start playback automatically.
Tracking will be automatically adjusted upon playback.
•
To adjust the tracking manually, press [TRACKING K /
L] on the remote control.
S-VHS cassette tape is not to be used on this unit.
•
Playback will stop when you change the output mode.
•
VCR FUNCTIONS
Recording
Press [VCR] first.
1) Insert a recordable tape with an erase-protection
tab intact.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette tape, remove its erase-
protection tab. To record on it later, cover
the hole with cellophane tape.
2) Select the recording mode using [REC MODE].
The desired recording mode is selected in SP
•
(standard play) or SLP (super long play) mode by
pressing [REC MODE].
Recording mode:
Tape speed
Recording / playback time
T60
Type of tape
SP mode
1hour
SLP mode
3hours
3) Press [INPUT SELECT] to select the appropriate
external input position (L1/L2) to which your
external tuner is connected.
4) Press [REC] to start recording.
Press [C] to stop the recording.
To pause recording:
Press [F].
To resume recording:
Press [F] or [REC].
After the unit has been in pause mode for 5 minutes,
it will stop automatically to protect the tape and the
video head from damage.
Refer to pages 31-34 for instructions on "TIMER
•
RECORDING".
Note
This function is available only when the unit is connected
•
by the VIDEO OUT jack.
erase-protection tab
T120
T160
2hours
2-2/3hours
6hours
8hours
EN
EN
81
81