Sanyo FWZV475F Owner's Manual page 30

Dvd recorder/vcr line-in recording (no tuner)
Hide thumbs Also See for FWZV475F:
Table of Contents

Advertisement

BASIC RECORDING & ONE-TOUCH TIMER RECORDING
4
Press [REC] to start recording.
"I" will be displayed for 4 seconds.
I
Press [F] to pause recording.
Press [F] ] or [REC] again to restart recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC] repeatedly until the desired recording time
(30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
0:30
I
(normal recording)
8:00
To change the recording length during the
one-touch timer recording:
Press [REC] repeatedly until the desired length appears.
To cancel the one-touch timer recording within the
specified time:
Press [C].
Note
When you press [REC], recording starts immediately and continues until the disc is full or you stop recording.
When the unit clock has not been set, the space for a date and time of title names will be blank.
You cannot change the recording mode during the recording pause mode.
You can change a channel (external input) to be recorded during the recording pause mode.
Note for one-touch timer recording
The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the power to standby to stop one-touch timer recording.
- Using [REC] or [C] on the remote control.
You cannot use the pause function during one-touch timer recording.
If DVD one-touch timer recording is completed during VCR playback or recording, the DVD will be in stop mode and the
VCR keeps the current mode.
When one-touch timer recording is finished and the power is turned to standby, the unit will switch to the timer-standby
mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-standby mode to
use the unit continuously.
30
30
EN
EN
SP
2:00
0:30
1:00
7:30
5
Press [C] to stop recording.
The recorded title will appear in the title list. (Refer
to "Guide to a Title List" on page 58.)
Writing to Disc
This operation may take a while to be
completed.
90%

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents