Sanyo FWZV475F Quick Start

4.
Prepare
1 After all the connections are complete,
connect the AC power cord.
2 Insert two Size AA (1.5V).
3
Press [ ] to turn On the unit.
y
4
Turn On your TV.
5 Press the button on the TV's remote
control that accesses the external input
channel repeatedly until you see "Initial
Setup" menu. (Please refer to your TV's
owner's manual.)
Initial Setup
OSD Language
English
Français
Español
Select the language for Setup display.
If the TV is connected by an HDMI cable,
it may take a while for the "Initial Setup"
menu to come up.
6 Use [K/L] to select your desired
language, then press [OK].
7 Use [K/L] to select calendar or time,
then press [OK].
Clock Setting
- - - / - - / - - - - ( - - - )
- - : - - - -
8 Use [0/ / 1] to select an item to set, and
use [K/L] to select the contents to suit
your preference, then press [OK] when
you finish setting all the contents.
Clock Setting
JAN / 29 / 2015 ( THU )
12 : 00 AM
Your setting will be activated.
The clock starts counting when you press
[OK].
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric Co., Ltd. and Funai Corporation, Inc. under license
from SANYO Electric Co., Ltd.
Any liability related to SANYO products, including design and quality, is the sole responsibility of Funai Electric Co., Ltd. and Funai
Corporation, Inc.
Please contact Funai Corporation, Inc. for any questions or claims related to SANYO products: 1 866 212 0436 sanyo-av.com
5.
Record(DVD)
This Recorder only record on DVD-RW/-R,
cannot record on DVD+RW/+R.
Press [DVD] first.
1
Insert a recordable disc (refer to page
24 in the Owner's Manual on how to
insert a disc).
Align the disc to
the disc tray guide.
2 Press [REC MODE] repeatedly to
select a recording mode.
3
Press [INPUT SELECT] to select the
appropriate external input position
(L1/L2) to which your external tuner is
connected.
Then select the desired channel to
record on the external tuner.
4 Press [REC] to start recording.
5 Press [C] to Stop recording.
The title list will appear automatically after
writing to a disc is completed.
e.g.) DVD-R
Writing to Disc 90%
• Press [C] to exit the title list.
You will need to finalize DVD-RW or DVD-R
to play them back on other DVD players.
Refer to page 42 in the Owner's Manual
on how to finalize a disc.
http://www.sanyo-av.com/
Quick
Start
1. 2.
Connecting to an
External Tuner Select
1.

Connecting to an External Tuner

IN --- AUDIO --- OUT
L
Audio cable
R
IN --- VIDEO --- OUT
Video cable
rear of this unit
For more info,
i
f o
n
please contact 1-866-212-0436
or visit : sanyo-av.com
http://www.sanyo-av.com/
Manual
Please read the supplied Owner's Manual
for the detailed instructions.
Printed in China
E9P8GUH
2VMN00194 #####
* 2 V M N 0 0 1 9 4 *
FWZV475F
DVD Recorder/VCR LINE-IN RECORDING (No Tuner)
3. 4.
Connect Prepare
Video cable
Audio cable
AUDIO IN
R
L
AUDIO OUT
R
VIDEO IN
external tuner
ANT.OUT ANT. IN
ANT. IN
RF coaxial cable
5.
Record
(DVD)
L
VIDEO OUT
satellite
dish
or
cable TV
company