Before You Start; Finding The Viewing Channel On Your Tv - Sanyo FWZV475F Owner's Manual

After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.

Finding the Viewing Channel on Your TV

Input Mode Names for Common TV Brands (Example)
Admiral AUX
Curtis LINE1, LINE2,
Mathis 00, 90, 91, 92, 93
Funai AUX CHANNEL
GE INPUT, TV/VCR,
00, 90, 91, 92, 93
Hitachi INPUT, AUX
JVC VIDEO, VIDEO 1,
VIDEO 2, VIDEO 3
Kenwood AUX
LXI-Series 00
Note
Video input selection varies for different brand's models
•
of TVs.
Consult your TV manufacturer if none of the above are
•
successful.
20 20 EN EN

BEFORE YOU START

Panasonic TV/VIDEO
RCA INPUT, TV/VCR,
00, 90, 91, 92, 93
Samsung TV/VIDEO
Sanyo VIDEO
Sharp 00
Sony VIDEO1, VIDEO2,
VIDEO3
Toshiba TV/GAME
Zenith 00
1
After you have made all the necessary
connections, press [y] to turn on the
unit.
2
Turn on your TV.
If connected to your VCR make sure it is
•
switched off or in standby mode before
proceeding.
3
Press "2" on the TV's remote control,
then press channel down button
repeatedly until you see "Initial Setup"
menu.
Initial Setup
OSD Language
English
Français
Español
Select the language for Setup display.
This is the correct viewing channel (external input
channel) for the recorder.
For some TVs, there may be a button on the
•
TV's remote control that accesses the external
input channel. It may be labeled "SOURCE",
"AV" or "SELECT". In such case, press it
repeatedly. Refer to your TV's user manual for
details.
If more than 10 minutes have passed since
•
you have turned on the unit, you may see the
screen saver instead of "Initial Setup" menu.
Screen saver:
4
Proceed to step 2 in "INITIAL SETTING"
on page 25.