Table of Contents
Advertisement
119
2. Instrument cluster
Electronic features control can be turned on/off when
Vehicles without a smart entry & start system
The engine switch is in the "ON" position.
Vehicles with a smart entry & start system
The engine switch is in IGNITION ON mode.
System check display
Vehicles with a smart entry & start system
After switching the engine switch to IGNITION ON mode, opening image is
displayed while system operation is checked. When the system check is com-
plete, the normal screen will return.
Vehicles without a smart entry & start system
After turning the engine switch to "ON" position, opening image is displayed
while system operation is checked. When the system check is complete, the
normal screen will return.
Conditions for ending electronic features control
In the following situations, the electronic features control will end automati-
cally:
The menu switch is pressed
Toyota parking assist-sensor starts operating (if equipped)
The Crawl Control is operated (if equipped)
The dynamic radar cruise control is operated (if equipped)
A warning message appears after the electronic features control screen is
displayed
Turn-by-turn navigation (vehicles with a navigation system)
The turn-by-turn navigation appears only
while route guidance of the navigation
system is being performed. When a turn
approaches, the distance to the turn and
the turn direction are displayed.
Distance to the next turn
1
Turn direction
2
The image shown may differ from the
actual intersection.
LC150_OM_OM60K29E_(EE)
Advertisement
Table of Contents
