Using On-Screen Display
Using the menus
The projector has an On-Screen Display (OSD) that lets you make image adjustments and change
various settings.
Navigating the OSD
You can use the remote control or the buttons on the top of the projector to navigate and make
changes to the OSD. The following illustration shows the corresponding buttons on the remote
control and on the projector.
1. To open the OSD, press the
are five folders on the menu. Press the cursor ◄ or ► buttons to move through secondary
menus.
2. Press ▲ or ▼ to select menu items and ◄ or ► to change values for settings. Press
to confirm the new setting.
CANCEL/RETURN
3. Press
34
Menu
button on the OSD control panel or remote control. There
MENU
to leave a submenu or
to close menu.
ENTER