Fujitsu stylistic lt Reference Manual page 37

Table 3-11. BIOS Setup Power Savings Options Submenu (Continued)
Option
SUS/RES Switch
Resume On LAN
LAN Power During Suspend
APM CPU Idle Mode
LCD Backlight Level
Resume on Serial Activity
Settings
Disabled
Enabled
Off
On
Off
On
Normal
Diagnostic
Adjustable
Minimum Only
Disabled
Enabled
Description
Determines how the Suspend/Resume button is
configured.
Select Normal to allow Suspend/Resume button to
be used to suspend/resume system operation.
Select Resume Only to allow Suspend/Resume
button to be used only to resume operation from
suspended mode.
Select Power On/Off to configure the Suspend/
Resume button to act as an On/Off switch.
Caution
If the Power On/Off setting is selected, active data
will be lost if the Suspend/Resume button is used to
turn off the system.
Determines whether the system will wake up when
the optional internal LAN receives a magic packet in
Suspend mode. If Resume On LAN is On, then LAN
Power During Suspend should also be set to On.
Determines whether the LAN power is on during
Suspend mode.
Determines how clocks are managed in Idle mode
when APM software is running. (See "APM CPU Idle
Mode" on page 6-8 for more information.)
Determines whether the display backlight level can
be changed using Brightness hotpads.
Choose Adjustable to allow backlight level to be
changed.
Choose Minimum Only to disable Brightness
hotpads and set the backlight level to minimum at all
times.
Determines whether the video system resumes
when activity is detected on Serial Port A.
Select Enabled to resume video system operation
when a device (such as a serial mouse) connected to
Serial Port A is active.
BIOS Setup 3-17