Fujitsu stylistic lt Reference Manual page 34

Option
Idle Mode Timeout
Idle Mode CPU Speed
Standby Mode Timeout
Suspend Mode Timeout
Low Battery CPU Speed
POWER SAVINGS OPTIONS
SUBMENU
3-14 Configuring the Stylistic LT Pen Tablet System
Table 3-9 BIOS Setup Power Savings Options (Continued)
Settings
Off
1/2 second
60 MHz
90 MHz
120 MHz
180 MHz
Off
1 Minute
2 Minutes
4 Minutes
6 Minutes
8 Minutes
12 Minutes
16 Minutes
Off
5 Minutes
10 Minutes
15 Minutes
20 Minutes
30 Minutes
40 Minutes
60 Minutes
60 MHz
90 MHz
120 MHz
Description
This setting determines the amount of time elapsed with no
system activity before the CPU enters idle mode.
Select Off to disable Idle mode. When in idle mode, the CPU
speed drops to a speed selected from the Idle Mode CPU
Speed settings.
Idle Mode slows down the CPU (to the speed selected for the
Idle Mode CPU Speed BIOS option) during periods when the
system is not busy. (See "Idle Mode" on page 6-5 for more
information on idle mode.)
Determines the CPU speed when the system is in Idle mode.
Note that this setting does not determine the idle mode CPU
speed when APM (Advanced Power Management) software is
running. (See "APM CPU Idle Mode" on page 6-8 for more
information.)
Standby Mode turns off various devices in the system, including
the screen and the CPU until you start using the computer
again.
Select the period of time the system should be inactive before it
automatically enters standby mode. When in standby mode,
some system components, including the display, are turned off
to conserve battery power.
Select Off to disable the Standby Mode Timeout feature. (See
"Standby Mode" on page 6-6 for more information.)
Determines the amount of time elapsed with no system activity
before system operation is suspended automatically.
Determines the CPU speed used when the low battery warning
condition occurs.
Select this submenu to further refine power management BIOS
options. See "Power Savings Options Submenu (Accessed
Through The Power Savings Menu)" on page 3-16 for more
information.