Power System Specifications; Table 4-6 Power System Specifications - Fujitsu stylistic lt Reference Manual

Power System Specifications

Specifications for the Stylistic LT pen tablet power system are given in Table 4-6. The power system and
power management characteristics are further described in Chapter 6 of this manual.
Feature
Power Management APM Specification Revision 1.2
Specifications ACPI Specification Revision 1.0
Supported
Battery Packs Rechargeable 3-cell lithium ion battery
pack:
Capacity: 1300 mAh
Nominal operating voltage: 10.8 V
Charge time (in suspend or off mode):
Charge time (system running): 4 to 6 hours
Battery life:
Rechargeable 6-cell lithium ion battery
pack:
Capacity: 2600 mAh
Nominal operating voltage: 10.8 V
Charge time (in suspend or off mode):
Charge time (system running): 8 to 12 hours
Battery life:
TFT Display: 2 to 4 hours
CTF Display : 2 to 4 hours
Bridge Battery None
Sub Battery Lithium battery (built in)
3.0 V, 265 mAh
AC Adapter FMWAC4A, FMWAC4B, and FMWAC4C:

Table 4-6 Power System Specifications

Specification
2 − 4 hours
TFT Display: 1 to 2 hours
CTF Display: 1 to 2 hours
3 to 6 hours
• Input: 100-240 VAC, 50/60 Hz
• Output: 16 VDC ±10%, 2.7 A
Comments
ACPI and APM support can be configured in
BIOS Setup.
Chapter 6 of this manual describes system
power management in detail.
Charge times are for a 0% charged battery
pack charging in pen tablet (not in and
external battery charger).
In suspend mode, battery pack is charged in
slow charge or "trickle charge" mode for 60
minutes after 100% charge is reached. Note
that the Charging icon is not displayed in the
Status display during slow charge mode.
Battery life values are approximate.
Provides real time clock power backup.
Approximate battery life is 5 years. (Not field
replaceable.)
AC adapters approved for use with Stylistic
LT include: FMWAC4A, FMWAC4B,
FMWAC4C
Power System Specifications
4
4-5