3.0 WALL MOUNTING
3.1 Fit the heater wall brackets to the rear of the unit using the bolts provided
(see Figure 2, step 1 below).
3.2 Using Figure 1 and the dimensions table as a guide mark the positions of
the fixing points. Drill and plug the wall with suitable fixings.
3.3 Fix the top two fixings first (Figure 2 step 2) followed by the bottom two
fixings (Figure 2, step 3).
NOTE: THE MULTIPOINT WATER HEATER IS HEAVY. PRIOR TO
FIXTURE ENSURE THE WALL IS STRONG ENOUGH TO TAKE THE
WEIGHT OF THE WATER HEATER WHEN FULL.
1
Figure 2: Fixture of brackets and wall mounting
2
3
5