1. Main Components & Pre-Installation 1.1 Installation regulations 1.3 Components Item Description Temperature and Pressure Relief Valve WARNING Inlet Installation of the appliance must be done Wall Mounting Bracket (lower) by a qualified engineer in accordance with Neon Indicator prevailing and national regulations as listed below.
3. Installation - Water Table 2: Typical installation table WARNING Item Description Under no circumstances should the Cold Water Mains in factory fitted Temperature/Pressure Service Valve (not supplied) Relief Valve be removed. The cold water controls supplied MUST Pressure Reducing Valve (PRV) be fitted to the mains water supply to Balanced Cold Water Draw Off the appliance.
Page 4
The commissioning record in the full Operating and Maintenance Manual should be completed and then these left with the user for future reference. This Quick Fit Guide must be used in conjunction with the full Installation,Operation and Maintenance Manual. Heatrae Sadia, Hurricane Way, Norwich, Norfolk, NR6 6EA SPECIFICATION ADVICE HOTLINE t | 01603 420220 e | specifier@heatraesadia.com AFTER SALES SERVICE t | 0344 871 1535 e | customer.support@heatraesadia.com...