Dispensing Coffee Into Pots - WMF PROGRMAT GV Operating Instructions Manual

The automatic brewing function ensures that there is a
constant supply of coffee available to meet the continuous
demand. Selector 5 is set to "0" if a selection is to be
cancelled prematurely. The brewing process in progress is
completed first, however.
Press the ON / OFF switch
coffee immediately.

Dispensing coffee into pots

Coffee can also be dispensed directly into glass or thermos
pots positioned under the dispensing head of the
WMF PROGRAMAT GV . the amount of coffee to be
brewed must be selected first.
Selector 5 must be turned to
Dispensing is started by pressing the buttons (NORMAL)
or (SPECIAL). If (NORMAL) is pressed, coffee is taken
from the left-hand ground coffee hopper 1; if (SPECIAL) is
pressed, it is taken from the right-hand hopper. The
selected button 9 lights up while coffee is being dispensed.
The button must be pressed again for each subsequent pot
of coffee to be dispensed. If only one type of coffee is used
(normal situation), it is alternately metered from both
ground coffee hoppers.
The amount of coffee to be brewed for the pots is
programmed as required (between 1 and 2.5 litres) by the
WMF customer service.
The WMF PROGRAMAT GV includes two hotplates
specially for serving coffee from pots. These hotplates can
be switched on individually as required.
Caution!
The hotplates 11 are very hot when switched on and may
burn you!
3 to interrupt the dispensing of
for this purpose:
11
Fig. 8
Fig. 9
11
Fig. 10
52