Table of Contents
Advertisement
If a storage urn is used without automatic brewing
function, the machine must be connected to the dummy
jack 33.1259.7000 or the dummy plug 33.1253.5000 must
be fitted to the control line
the WMF PROGRAMAT GV (Fig. 5). When working with
different storage urns, with and without automatic brewing
function, the dummy socket / dummy plug must always be
connected to the side on which the urn without automatic
brewing function
20
is located.
Note!
If the quantity set exceeds the capacity of the storage urn, it
may overflow if there is no automatic brewing function
and you may be scalded.
The flexible hose
19
can move in all directions so that you can fill the storage
urn in any position.
The flexible hose
19
coupling (Fig. 7). A safety valve is fitted in the connector
on the flexible hose 19, thus ensuring that coffee cannot
leak out when the hose is not plugged in.
The following points must be noted in order to start
brewing coffee:
4. The flexible hose
(see Fig. 7) on the storage urn.
5. The control line
20
urn for automatic brewing. If the function is to be
bypassed, the dummy socket must be fitted in the
machine and the dummy plug on the control line (see
Fig. 5).
6. The storage urn must be plugged into the socket
the WMF PROGRAMAT GV or another 230 V socket
outlet and must be switched on via the
ON / OFF switch 23.
20
which remains plugged into
on your WMF PROGRAMAT GV
is connected to the storage urn via a
19
must be plugged into the coupling
must be plugged into the storage
Dummy jack
33.1259.7000
7
of
Dummy plug
33.1253.5000
Fig. 5
Variations:
Fig. 6
Fig. 7
51
Hide quick links:
Advertisement
Table of Contents
