Download Print this page

Setting Up And Connecting - AEG DVD 4615 HC Instruction Manual

Home cinema dvd/receiver kombination

Advertisement

Available languages

Available languages

Intended use
Defect
Unpacking
Setting up
Setting up the Loudspeakers
05-DVD 4615 HC_GB.indd 47
05-DVD 4615 HC_GB.indd 47
The DVD-Player is solely intended for the following tasks:
Playing of Video DVD/Video CD.
Playing of Audio-CD,
Reception of radio programmes.
Any other use is considered non-intended use and is prohibited.
If the machine should become defective at some point:
If the power supply cable for this appliance is damaged, it must be
replaced by the manufacturer or his customer services, in order to
avoid hazards.
Should fl uid have seeped into the player or if the player has been
dropped down or damaged in any other way, the player must be exa-
mined by an authorized dealer. Disconnect the player from the power
supply and consult an authorized dealer.

Setting up and connecting

Unpack the appliance and all accessories and check that the contents are
complete.
ATTENTION:
Always transport/send the player in its original packaging to prevent
it from being damaged. Keep the packaging for this purpose. Dispose
of unnecessary packaging material in accordance with the regulati-
ons applicable in your country.
NOTE:
Get in touch with your dealer immediately if you notice damage
caused by transport.
1. Place the player on a stable, heat resistant, horizontal and level
surface. Keep a distance of at least 10 cm from walls and objects.
2. Connect the device to a properly installed power socket.
NOTE:
Do not insert the plug of the DVD player into the socket until all
loudspeakers and connections have been correctly made!
1. Remove approximately 1,5 cm of the cable insulation.
2. Turn over the cable end.
3. Open the cable clamp by pressing the lug.
4. Now connect the loudspeaker cable supplied to the loudspeaker.
Ensure the correct polarity (connect black to black and red to red).
5. Now connect the other end of the cable accordingly to the SPEAKERS
OUT of the DVD player. Please proceed as described under steps 1-4.
NOTE:
Please ensure that exposed wires do not touch or cross each other.
Danger of short-circuiting!
English
47
21.05.2008 8:08:23 Uhr
21.05.2008 8:08:23 Uhr

Hide quick links:

Advertisement

Chapters

loading