Schwaiger DSR 1004 CW VFD User Manual
  1. Manuals
  2. Brands
  3. Schwaiger Manuals
  4. Receiver
  5. DSR 1004 CW CI VFD
  6. User manual
Schwaiger DSR 1004 CW VFD User Manual

Schwaiger DSR 1004 CW VFD User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GB
User's Manual
Digital Satellite Receiver
Cryptoworks embedded
DSR 1004 CW VFD
DSR 1004 CW CI VFD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSR 1004 CW VFD and is the answer not in the manual?

Questions and answers

Related Manuals for Schwaiger DSR 1004 CW VFD

Summary of Contents for Schwaiger DSR 1004 CW VFD

  • Page 1 DSR 1004 CW VFD DSR 1004 CW CI VFD User's Manual Digital Satellite Receiver Cryptoworks embedded...
  • Page 2 Guarantee / Safety and installation information Guarantee The guarantee period begins with the purchase of the product. Please confirm this with your proof of purchase (receipt, invoice, delivery receipt etc.). Please keep these documents in a safe place. Our guarantee is based on our guarantee conditions in force at the time of purchase.
  • Page 3 Guarantee / Safety and installation information The mains adaptor / mains plug must only be plugged in once installation has been completed according to the instructions. The unit must not be used if the mains adaptor / mains plug is faulty or the unit is damaged in any other way.

  • Page 4: General Safety

    General Safety Warning Always follow these instructions to avoid the risk of injury to yourself or damage to your equipment. Unplug the receiver from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of the receiver. Do not use accessories or attachments not recommended by the receiver manufacturer as they may cause problems to the equipment and will void the warranty.
  • Page 5 General Safety Route power supply cord so that are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to the cords that plugs in the convenience receptacles, and the point where they exit from the unit. Use an outlet that contains surge suppression or ground fault protection.
  • Page 6 DIGITAL SATELLITE RECEIVER OWNER’S MANUAL SIMPLE & SPEEDY OPERATION HANDBOOK Before operation, Please read the entire manual thoroughly and retain it for future reference.
  • Page 7 Channel Search Channel List Edit Channel List Program Guide System Setting Utility (Option)

  • Page 8: Table Of Contents

    Contents Remote Control Unit ................Front Panel ..
  • Page 9 Contents Menu Transparency ................Change PIN Code .

  • Page 10: Remote Control Unit

    Remote Control Unit Note 1 When inserting batteries, make sure that the polarity (+/-) is correct. The design of the Remote Control Unit may be changed without any notice in advance.
  • Page 11 Remote Control Unit MUTE To enable or disable audio. STAND BY To switch between operation and stand by mode. NUMERIC BUTTONS To select the channel and enter the channel edit and PIN code. TV/STB To switch between TV and STB receive mode. TV/RADIO To switch between TV and Radio.

  • Page 12: Front Panel

    Front Panel DSR 1004 CW CI VFD DSR 1004 CW VFD 1. POWER Switch the receiver power “ON” or “OFF”. 2. MENU To see main menu. 3. EXIT (Schließen) Exit from parameter and cancel selected function. 4. OK Select a program, a highlighted line or parameter value.

  • Page 13: Rear Panel

    Rear Panel DSR 1004 CW CI VFD DSR 1004 CW VFD 1. POWER SUPPLY 90 ~ 250V AC, 50/60Hz. 2. S/PDIF Output for connection to a digital amplifier. 3. SCART FOR VCR Connect this port to the VCR via SCART cable.

  • Page 14: Connecting Your Equipment

    There are several ways of connecting the STB to your TV, VCR and/or Hi-Fi SYSTEM. Consult your local supplier for assistance in setting-up your system that is best suited to your requirements. DSR 1004 CW CI VFD DSR 1004 CW VFD DIGITAL SATELLITE RECEIVER...
  • Page 15 Connecting Your Equipment 1. Connect STB to a TV set Connect your STB to a TV set with SCART, if your TV set is equipped for it. Alternatively you can use A/V, TV out (UHF) or S/Video jacks. 2. Connect STB to a VCR Connect the SCART jack from the VCR to the back of your STB.
  • Page 16 Connecting Your Equipment TV with Terrestrial Antenna 1. Connect one end of RCA/Cinch cable to the RCA/Cinch jack on the back of the STB and the other end to a RCA/Cinch jack on your TV. If your TV doesn’t have a RCA/Cinch jack, connect one end of RF cable to the TV OUT on the back of the STB and the other end to a RF input jack on your TV.
  • Page 17 Connecting Your Equipment TV with Motorized System (DiSEqC 1.2) 1. Connect one end of RCA/Cinch cable to the RCA/Cinch jack on the back of the STB and the other end to a RCA/Cinch jack on your TV. If your TV doesn’t have a RCA/Cinch jack, connect one end of RF cable to the TV OUT on the back of the STB and the other end to a RF input jack on your 2.
  • Page 18 Connecting Your Equipment Reference  All our receivers are designed to be DiSEqC 1.0 and DiSEqC 1.2 compatible. This allows multiple antennas to be connected to the STB at the same time. If you have two or more fixed antennas or LNBs then we recommend you use a DiSEqC 1.0 switch. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch.

  • Page 19: Basic Operation

    Basic Operation Basic Function 1. Program Information After the television channels have been programmed, you will see the information box each time you change the channels. 1. Every time you change channels you will receive program information for a few seconds. (In the “Banner Time” menu you can select how long this information will be shown.) 2.

  • Page 20: Basic Function

    Basic Operation Basic Function 4. Next-Information Banner 1. During “Channel Banner” is appearing, when you press YELLOW Button, you can get “Next-Information Banner” 2. Using “Next-Information Banner”, you can get a simple EPG of “Next-Information”. 5. Channel-Information Banner 1. During “Channel Banner” is appearing, when you press INFO(BLUE) Button, you can get “Channel-Information Banner”.
  • Page 21 Basic Operation Basic Function 7. Teletext / Subtitle 1. Press the RED button, popup window will be displayed on the screen. 2. Select the off, then subtitle function is off. 3. Select the Subtitle, then you can see the Subtitle language. 4.
  • Page 22 Basic Operation Basic Function 9. Simple Channel List 1. When you press OK( ) button during receiving service stream, you can get “Channel List” view. 2. Using UP/DOWN( ) buttons in “Channel List” view, you can choose another channel. 3. After moving highlight on a channel, then press OK( ) button.

  • Page 23: Menu Guide

    Menu Guide Easy Installation Before you can view the television or radio program, you must perform the installation procedure first. Therefore you will see only “Easy Installation Menu” at first when you plug in your system. The Easy Installation gives you the convenience of selecting various languages, adjusting the time and channel search.
  • Page 24 Menu Guide Easy Installation Language The first option is “Language Select” to select the desired language of the Menu, Audio, or Subtitle. Place the cursor on the sub menu by pressing the keys and press the OK( ) button to change language. The Language of Menu, Audio, or Subtitle will be changed to the selected lan- guage.

  • Page 25: Main Menu

    Menu Guide Main Menu Press the MENU button on the remote control unit. You will see the “Main Menu” on the screen. 1. You can move into the desired submenu using UP/DOWN( ) buttons. 2. You should enter the PIN code in order to move into the corresponding submenu in case of “Edit Channel List or “System Setting”.

  • Page 26: Channel Search

    Menu Guide Channel Search Channel Search / Installation (None, DiSEqC Switch) 1. Satellite : Select the satellite list you want using UP/DOWN( buttons on the satellite list. - Edit, Add, or Delete ♦ Press YELLOW button to edit, add, or delete satellite list. Pop Up menu will appear.
  • Page 27 Menu Guide Channel Search - Scan Press the RED button on the TP list. Pop up window will be displayed on the screen. ♦ Frequency : Input a proper Frequency using NUMERIC buttons. ♦ Symbol Rate : Input a proper Symbol Rate using NUMERIC buttons. ♦...
  • Page 28 Menu Guide Channel Search 3. C/KU Switch : You can select C/KU band by selection of switch type. 4. LNB Freq. : Select the proper LNB frequency referring to your LNB using OK( ) and UP/DOWN( ) buttons. 5. C-LNB Freq. : When selecting the C/KU Switch is selected as “None”, the C-LNB Freq will be dimmed automatically.

  • Page 29: Channel Search / Installation (Diseqc 1,2)

    Menu Guide Channel Search Channel Search / Installation (DiSEqC 1,2) 1. Satellite : Select the satellite list you want using UP/DOWN( buttons on the satellite list. - Edit, Add, or Delete ♦ Press YELLOW button to edit, add, or delete satellite list. Pop Up menu will appear.
  • Page 30 Menu Guide Channel Search - Scan Press the RED button on the TP list. Pop up window will be displayed on the screen. ♦ Frequency : Input a proper Frequency using NUMERIC buttons. ♦ Symbol Rate : Input a proper Symbol Rate using NUMERIC buttons. ♦...
  • Page 31 Menu Guide Channel Search 6. 22KHz : Depending on the user’s antenna switch box or LNB. You can supply either 22KHz by setting “ON” or not by setting ”OFF”. When selecting the U-LNB 1 and U-LNB 2, the 22KHz will be dimmed. 7.

  • Page 32: Channel Search / Installation (Usals)

    Menu Guide Channel Search Channel Search / Installation (USALS) 1. Satellite : Select the satellite list you want using UP/DOWN( buttons on the satellite list. - Edit, Add, or Delete ♦ Press YELLOW button to edit, add, or delete satellite list. Pop Up menu will appear.
  • Page 33 Menu Guide Channel Search - Scan Press the RED button on the TP list. Pop up window will be displayed on the screen. ♦ Frequency : Input a proper Frequency using NUMERIC buttons. ♦ Symbol Rate : Input a proper Symbol Rate using NUMERIC buttons. ♦...
  • Page 34 Menu Guide Channel Search 7. 0V/12V : Depending on the user’s antenna switch box. You can choose either 0V/12V. 8. Tone Burst : Depending on the user’s antenna switch box. (“off”, “SAT A” or “SAT B”) 9. Longitude : Press the NUMERIC buttons and enter the Longitude. When the OK( ) button is pressed.

  • Page 35: Channel List

    Menu Guide Channel List This menu helps you to easily select the channel that you want to watch. You can see the channel list when you had searched before. To use this menu, you should set channel group you want in the channel control menu. 1.

  • Page 36: Edit Channel List

    Menu Guide Edit Channel List From these menus, You can create favorite lists, lock, skip, delete, or move channel. 1. Select “Edit Channel List” in the main menu with UP/DOWN( ) buttons and press OK( ) button. 2. At the request window, Input PIN code.
  • Page 37 Menu Guide Edit Channel List 1. Favorite 1 ~ 8 (Option) 1. You can edit favorite TV and Radio list. This enables you to create the 8 favorite TV and Radio lists. 2. Select the channel you want to edit favorite list and press OK( ) button.
  • Page 38 Menu Guide Edit Channel List 4. Skip 1. You can skip TV or Radio channel from the current list. 2. Select the channel you want to skip and press OK( ) button. 3. To recover the skipped channel, press the OK( ) button from edit list.

  • Page 39: Program Guide

    Menu Guide Program Guide The program guide supplies information such as program listings and ending times for all available programs. 1. Select “Program Guide” in the main menu with UP/DOWN( ) buttons and press OK( ) button. In the viewing program, when you press the EPG button, you can get this view.

  • Page 40: System Setting

    Menu Guide System Setting You will be asked to enter your PIN code before you can enter this menu. The PIN code preset to 0000 from the factory. The code can be changed from the “Change PIN Code” menu. Refer to page 37. If you want to customize the system to suit you better, you can specify some settings from the submenus in the “System Setting”...

  • Page 41: Audio Language

    Menu Guide System Setting 2. Audio Language In this menu You can change default language for audio when changing services. 1. Use the UP/DOWN( ) buttons to move to language you want and then press OK( ) button. You can choose the language from a selection of English, Spanish, Finnish, Norwegian, Swedish, German, French, Turkish, Italian, Slovenian, Ukrainian, Russian, Czech, Latvian, Arabic, Farsi, Danish, Bulgarian, Romanian, Serbian, Dutch, Hungarian, Albanian.(Option)

  • Page 42: Screen Type

    Menu Guide System Setting 5. Screen Type If you have a TV set with the 4:3 picture format and the transmission is in 16:9, you can select 4:3 letterbox, 4:3 full screen and 16:9 full screen. 1. Select the aspect ratio of TV which is connected to STB and then press OK( ) button.

  • Page 43: Rf Channel (Option)

    Menu Guide System Setting 8. RF Channel (option) Select this alternative if you have to change the RF channel. Select an UHF Channel you want with UP/DOWN( ) buttons. The RF Channel ranges from 21 to 69. 9. Local Time You can set your local time according to your location.

  • Page 44: Change Pin Code

    Menu Guide System Setting 11. Change PIN Code From here you can change the PIN code from the standard 0000. DO NOT FORGET IT! Without it, you are not able to access to any of the functions where the code is required. You can change password for Parental Lock and Receiver Lock simultaneously.

  • Page 45: Receiver Lock

    Menu Guide System Setting 13. Receiver Lock If you select “On”, you will have to enter the PIN code every time you start the receiver from standby. 14. Menu Lock If you select “On”, you will have to enter the PIN code every time when you enter the Channel Search Menu and Channel List Menu DIGITAL SATELLITE RECEIVER...

  • Page 46: Auto Power (Option)

    Menu Guide System Setting 15. Auto Power (option) 1. If the Auto Power is set to On and power is off, the Set turns on automatically and turns into the channel mode which you were watching before power break- down. 2.

  • Page 47: Ca System (Option)

    Menu Guide CA System (Option) The menus are provided by the CA module and its smart card. Your receiver is equipped with two slots of Common Interface(CI), accepting both Type 1 and Type 2 PCMCIA modules(see diagram below.). Plug in the appropriate CI module together with a valid smart card. You will then have access to the respective scrambled and Pay-Per-View services.

  • Page 48: Utility (Option)

    Menu Guide Utility (option)  Select “Demonstration” in the Utility menu with UP/DOWN( ) buttons and press OK( ) button, you can see the Automatic Operation Function. Press the EXIT button to quit the Automatic Operation Function completely.  Select “Calendar” in the Utility menu with UP/DOWN( ) buttons and press OK( ) button, you can see the Calendar.
  • Page 49 Menu Guide Utility (option)  Select “Zoom” in the Utility menu with UP/DOWN( ) buttons and press OK( ) button, the white frame will appear. ♦ Select the size and position of video you want to expanded with RED/GREEN, LEFT/ RIGHT buttons and press OK( ) button, you can see the expanded video.

  • Page 50: Troubleshooting

    Troubleshooting Problem Solution No display LED on the front panel. Power cord plug in correctly. No power supply No Picture Ensure that the STB is switched on. Check connection and correct. Check channel and video output and correct Poor picture quality Check the signal level, if this is low then try adjusting the alignment of your dish.
  • Page 51 Technical Specifications Tuner 1/2, 2/3, 3/4, 5/6, 7/8 FEC Modes Rate F type female (75 Ohm) Input Connector Frequency Range 950MHz ~ 2150MHz Symbol Rate 2 ~ 45 Mbaud QPSK Demodulation RF Modulator PLL type CH 21-69 for the modulation PAL B/G, I, SECAM L, NTSC M selectable TV Standard 75 Ohms, 169-2, Male/Female...

  • Page 52: Technical Specifications

    Technical Specifications A/V & Data Input/Output RCA/Cinch, Video Output(CVBS)/SCART(CVBS, RGB) Video RCA/Cinch Volume & Mute Control Resolution: 20 bits DAC, Max 2Vrms Audio RS-232C Transfer rate 115Kbps, 9 PIN D-Sub Type System Resources Flash Memory 1Mbyte, 2Mbytes (Option) 8Mbytes, 16Mbytes (Option) SDRAM STi 5518 Main CPU MPEG Chip...

  • Page 53: Menu Map

    Menu Map Main Menu Menu Language Channel Search Audio Language Subtitle Language Channel List SCART Output Edit Channel List Screen Type Program Guide Banner Time System Setting RF Mode RF Channel Local Time Menu Transparency Change PIN Code Parental Lock Receiver Lock Menu Lock CA System (Option)
  • Page 54 Würzburger Str. 17 90579 Langenzenn 90579 Langenzenn -Germany- -Germany- Tel Hotline +49 ( 0 ) 9101 702 299 Tel Hotline +49 ( 0 ) 9101 702 299 www.schwaiger.de www.schwaiger.ed info@schwaiger.de info@schwaiger.ed DSR 1004 CW VFD DSR 1004 CW CI VFD...

Table of Contents