Specifications - Makita DLS713 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Blade diameter
Blade body thickness
Hole (arbor) diameter
Max. Miter angle
Max. Bevel angle
Max. Cutting capacities (H x W) with blade 190 mm in diameter.
Miter angle
0°
45° (left and right)
57° (right)
-1
No load speed (min )
Dimensions (L x W x H)
Net weight
Rated voltage
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 20 mm thickness
2: When using a wood facing 15 mm thickness
3: When using a wood facing 10 mm thickness
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
To avoid injury from flying debris, keep
holding the saw head down, after
making cuts, until the blade has come to
a complete stop.
･
When performing slide cut, first pull
carriage fully and press down handle,
then push carriage toward the guide
fence.
･
Do not place hand or fingers close to the
blade.
45° (left)
25 mm x 300 mm
-----
25 mm x 212 mm
-----
-----
-----
END014-3
Cd
Ni-MH
Li-ion
Intended use
The tool is intended for accurate straight and miter
cutting in wood.
2
Bevel angle
0°
52 mm x 300 mm
* 60 mm x 265 mm (Note 1)
52 mm x 212 mm
* 60 mm x 185 mm (Note 2)
52 mm x 163 mm
* 60 mm x 145 mm (Note 3)
655 mm x 430 mm x 454 mm
･
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
DLS713
190 mm
1.3 mm - 2.0 mm
20 mm
Left 47° , Right 57°
Left 45°, Right 5°
5° (right)
40 mm x 300 mm
-----
-----
-----
-----
-----
2,200
12.7 kg
D.C.18 V
ENE076-1