Hookups; Hooking Up The Player; Step 1: Connecting The Video Cords - Sony DVP-NS900V Operating Instructions Manual

Hookups

Hooking Up the Player

Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 16).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.

Step 1: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver). In order to view progressive signal (480p) pictures with a compatible
TV, projector, or monitor, you must use connection C.
20