Specifications - Sony DVP-NS900V Operating Instructions Manual

Specifications

System
Laser
Signal format system
Audio characteristics
Frequency response
Signal-to-noise ratio (S/N ratio)
Harmonic distortion
Dynamic range
Wow and flutter
Outputs
Jack name
AUDIO OUT L/R (1/2)
DIGITAL OUT (OPTICAL)
DIGITAL OUT (COAXIAL) Phono jack
5.1CH OUTPUT
COMPONENT VIDEO
OUT(Y, P , P )
B R
VIDEO OUT (1/2)
S VIDEO OUT (1/2)
PHONES
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Supplied accessories
See page 16.
Specifications and design are subject to change without notice.
E S
is a U.S. registered mark. As an
NERGY TAR R
has determined that this product meets the
Semiconductor laser
NTSC
DVD (PCM 96 kHz): 2 Hz to 44 kHz (–2 dB ± 1 dB at 44 kHz)
SACD: 2 Hz to 100 kHz (–3 dB ± 1 dB at 50 kHz)
CD: 2 Hz to 20 kHz (±0.5 dB)
115 dB (DVD VIDEO) (AUDIO OUT L/R 1/2 jacks only)
0.002 %
DVD VIDEO/SACD: 103 dB
CD: 99 dB
Less than detected value (±0.001% W PEAK)
Jack type
Phono jack
Optical output jack
Phono jack
Phono jack
Phono jack
4-pin mini DIN
Phone jack
120 V AC, 60 Hz
26 W
430 × 113 × 343 mm (17 × 4
11
5.3 kg (11 / lb)
16
5 ° C to 35 ° C (41 ° F to 95 ° F)
25 % to 80 %
E
NERGY
Output level
2 Vrms (at 50 kilohms)
–18 dBm
0.5 Vp-p
2 Vrms (50 kilohms)
Y: 1.0 Vp-p
P , P : 0.7 Vp-p
B R
1.0 Vp-p
Y: 1.0 Vp-p
C: 0.286 Vp-p
12mW
× 13
1 / 5 / in.) (w/h/d) incl. projecting parts
2 8
E S
Partner, Sony Corporation
NERGY TAR R
S
guidelines for energy efficiency.
TAR R
Load impedance
Over 10 kilohms
Wave length: 660 nm
75 ohms terminated
Over 10 kilohms
75 ohms, sync negative
75 ohms
75 ohms, sync negative
75 ohms, sync negative
75 ohms terminated
32 ohms
101