Download  Print this page

Sony RMT-D139P Service Manual

Sacd/dvd player
Hide thumbs

Advertisement

Quick Links

SERVICE MANUAL
System
Laser
Semiconductor laser
Signal format system
NTSC/PAL
Audio characteristics
DVD (PCM 96 kHz): 2 Hz to 44 kHz (–2 dB ± 1 dB at 44 kHz)
Frequency response
SACD: 2 Hz to 100 kHz (–3 dB ± 1 dB at 50 kHz)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio)
115 dB (DVD VIDEO) (AUDIO OUT L/R 1/2 jacks only)
Harmonic distortion
0.002 %
Dynamic range
DVD VIDEO/SACD: 103 dB
CD: 99 dB
Wow and flutter
Less than detected value (±0.001% W PEAK)
Outputs
Jack name
Jack type
AUDIO OUT L/R
Phono jack
DIGITAL OUT (OPTICAL)
Optical output jack
DIGITAL OUT (COAXIAL) Phono jack
5.1CH OUTPUT
Phono jack
COMPONENT VIDEO
Phono jack
OUT(Y, P
/C
, P
/C
)
B
B
R
R
VIDEO OUT
Phono jack
S VIDEO OUT
4-pin mini DIN
PHONES
Phone jack
Photo: Titanium gray type

SPECIFICATIONS

Output level
Load impedance
2 Vrms (at 50 kilohms)
Over 10 kilohms
–18 dBm
Wave length: 660 nm
0.5 Vp-p
75 ohms terminated
2 Vrms (50 kilohms)
Over 10 kilohms
Y: 1.0 Vp-p
75 ohms, sync negative
P
/C
, P
/C
: 0.7 Vp-p
75 ohms
B
B
R
R
1.0 Vp-p
75 ohms, sync negative
Y: 1.0 Vp-p
75 ohms, sync negative
C: 0.3 Vp-p (PAL)
75 ohms terminated
0.286 Vp-p (NTSC)
12mW
32 ohms
DVP-NS900V
RMT-D139P/D140A/D140E/D140P
Hong Kong Model
General
Power requirements
120 V AC, 60 Hz (US, CND, MX)
220 to 240 V AC, 50/60 Hz (AEP, UK, RUS)
220 V AC, 60 Hz (HK, KR)
See page 2 for further information.
Power consumption
25 W (AEP, UK, RUS)
26 W (EXCEPT AEP, UK, RUS)
430 × 113 × 343 mm (w/h/d) incl. projecting parts
Dimensions (approx.)
Mass (approx.)
5.3 kg
5 ° C to 35 ° C
Operating temperature
Operating humidity
25 % to 80 %
Supplied accessories
Check that you have the following items:
• Audio/video cord (pinplug × 3 y pinplug × 3) (1)
• S VIDEO cord (1)
• Remote commander (remote) RMT-D139P (1) (AEP1, AEP3, UK1, RUS)
• Remote commander (remote) RMT-D140A (1) (US, CND, MX, KR)
• Remote commander (remote) RMT-D140E (1) (HK)
• Remote commander (remote) RMT-D140P (1) (AEP2, UK2)
• Size R6 (AA) batteries (2)
Specifications and design are subject to change without notice.
• Abbreviation
CND
: Canadian
HK
: Hong Kong
KR
: Korea
MX
: Mexican
RUS
: Russian
SACD/DVD PLAYER
US Model
Canadian Model
AEP Model
UK Model
Russian Model
Mexico Model
Korea Model

Advertisement

Table of Contents
loading

  Also See for Sony RMT-D139P

  Related Manuals for Sony RMT-D139P

  Summary of Contents for Sony RMT-D139P

  • Page 1: Specifications

    • S VIDEO cord (1) Jack name Jack type Output level Load impedance • Remote commander (remote) RMT-D139P (1) (AEP1, AEP3, UK1, RUS) AUDIO OUT L/R Phono jack 2 Vrms (at 50 kilohms) Over 10 kilohms • Remote commander (remote) RMT-D140A (1) (US, CND, MX, KR) •...
  • Page 2 OPERATION. REPLACE THESE COMPONENTS WITH DE FONCTIONNEMENT. NE REMPLACER CES COM- SONY PARTS WHOSE PART NUMBERS APPEAR AS POSANTS QUE PAR DES PIÈCES SONY DONT LES SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- NUMÉROS SONT DONNÉS DANS CE MANUEL OU LISHED BY SONY.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Section Title Page Section Title Page Service Note ................5 MB-101 (2ch/6ch DAC) Schematic Diagram ....4-29 MB-101 (H3GA) Schematic Diagram ......4-31 GENERAL MB-101 (SACD DECODER) Schematic Diagram ..4-33 MB-101 (DSD DSP) Schematic Diagram ..... 4-35 MS-81 (LOADING) Getting Started ..............
  • Page 4: Section Title Page

    Section Title Page REPAIR PARTS LIST 8-1. Exploded Views ............. 8-1 8-1-1. Main Assembly ............8-1 8-1-2. Chassis Assembly ............ 8-3 8-1-3. Mechanism Deck Assembly ........8-5 8-2. Electrical Parts List ............8-6 • Abbreviation CND : Canadian : Hong Kong : Korea : Mexican RUS : Russian...
  • Page 5: Service Note

    SERVICE NOTE 1. DISASSEMBLY • This set can be disassembled in the order shown below. Top Case (Page 2-1) Tray Panel Assy MB-101 Board AU-230 Board RY-13 Board Mechanism Deck (Page 2-1) (Page 2-3) (Page 2-3) (Page 2-3) (Page 2-4) Front Panel Block VP-57 Board EV-14 Board...
  • Page 6 2. DISC REMOVAL PROCEDURE 3) Set the service jig (two flexible flat cables) (J-6090-109-A) as shown in Fig. 3. (at POWER OFF) 1) Insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck cam in the direction of the arrow A.
  • Page 7: General

    CD/DVD PLAYER More convenient features AC 00V 00Hz method claims of certain U.S. patents, other SONY CORPORATION MADE IN JAPAN 0-000-000-00 intellectual property rights owned by “DVD” may be used as a general term for DVD...
  • Page 8: Guide To The Remote Control Lcd Screen

    1 TV/DVD switch (78) Rear panel Remote OPEN/CLOSE button (38) 3 LCD (Liquid Crystal Display) screen (12) 4 PROGRAM button (43) 5 VIDEO EQ (video equalizer) button (67) SEARCH buttons (49) 7 ./> PREV/NEXT (previous/next) buttons (38) 8 H PLAY button (37) The H button has a tactile dot.
  • Page 9: Getting Started

    Each time you press DISPLAY, the Control Menu display changes as follows: MULTI/2CH (page 41) Selects the playback area on SACDs when Control Menu display 1 available. SUBTITLE (page 65) Displays the subtitles. Control Menu display 2 Changes the subtitle language. ADVANCED display (Appears if you select any setting other than “OFF.”...
  • Page 10: Hookups

    If your TV has an S-LINK (control S) input jack You can control the player from a Sony TV, or control a Sony TV using the player. For instance, 2 Switch the input selector on the TV to the player.
  • Page 11 In the case of 480 progressive scan picture problems, it is recommended that the user switch the connection to the standard definition output. If there are questions regarding your Sony TV set’s compatibility with this model 480p DVD player, please contact our customer service center. continued Connecting to your TV Connecting to an AV amplifier (having 5.1ch input jacks or a digital input...
  • Page 12 SACD/DVD player Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an MD deck or DAT deck This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use .
  • Page 13 SACD/DVD player Step 3: Connecting the Power Cord Plug the player and TV power cords into an AC outlet. Do not connect the power cord of your player to the “switched” power socket of an amplifier (receiver). When you turn off the power of your amplifier (receiver), the menu setting for the player such as Playback Memory may be lost.
  • Page 14: Playing Discs

    qf Press X/x to select the item. ql Press ENTER. Choose the item that matches the audio connection you selected in pages 25 to 29 ( The Setup Display for selecting whether or not you have connected a subwoofer appears. through SPEAKER SETUP SIZE:...
  • Page 15 To use headphones The Replay function is useful when you want to Notes Resuming Playback from review a scene or dialog that you missed. • Depending on where you stopped the disc, the player Connect headphones to the PHONES jack may not resume playback from exactly the same and adjust the headphones’...
  • Page 16 To select a playback area using the To go back to the menu Playing VIDEO CDs with Various Play Mode Press O RETURN. Control Menu PBC Functions Functions (PBC Playback) (Program Play, Shuffle Press DISPLAY. To play without using PBC, press ./> or the The Control Menu appears.
  • Page 17: Searching For A Scene

    Playing repeatedly (Repeat Play) Repeating a specific portion (A-B Press X/x to select the item. Press X/x to select the item. Repeat Play) xWhen playing a DVD VIDEO xWhen playing a DVD VIDEO (Program Play is set to “OFF”) You can play all of the titles or tracks on a (Program Play and Shuffle Play are •...
  • Page 18 xWhen playing a DVD VIDEO/ During pause mode (VIDEO CD only) Searching for a Title/ Press X/x or the number buttons to DVD-RW SLOW1y Slow (playback direction) select the title, chapter, track, Chapter/Track/Index/ (TITLE), SLOW2y Slow (playback direction – index, or scene number you want to (CHAPTER), Scene slower than SLOW1y)
  • Page 19: Viewing Information About The Disc

    Viewing Information About the Disc When playing a DVD VIDEO or DVD- When playing VIDEO CDs with PBC functions, Viewing the Playing Time Checking the Playing the scene number and the playing time are displayed. and Remaining Time on Time and Remaining Time The playing time and remaining time of the current Title playing time and the current title and chapter, title, track, scene, or disc will also appear on...
  • Page 20: Sound Adjustments

    Sound Adjustments To turn off the Control Menu Displaying the audio information of Changing the Sound 1 2 ( 2 7 ) PLAY Press DISPLAY repeatedly until the Control 1 8 ( 3 4 ) DVD VIDEO the disc 1 : 3 2 : 5 5 Menu is turned off.
  • Page 21: Enjoying Movies

    TVS STANDARD You can use the LCD and scroll key on the remote REAR to select a surround setting. Toggle the scroll key up or Uses sound imaging to create virtual rear down so that “SURROUND” appears in the LCD speakers from the sound of the front speakers screen.
  • Page 22: Adjusting The Picture

    • CINEMA 2: White colors become Adjusting the Picture Adjusting the Playback Press X/x to select a level. brighter and black colors become richer, and the color contrast is Quality Picture As the value increases, the mosaic like (BNR) (VIDEO EQUALIZER) increased.
  • Page 23: Using Various Additional Functions

    Using Various Additional Functions Enhancing the Playback Labeling the Disc Press X/x to select a level. Press x to select “DISC MEMO INPUT t” and press ENTER. Picture As the value increases, the outlines of (DIGITAL VIDEO ENHANCER) The “DISC MEMO INPUT” display images on your TV screen will become appears.
  • Page 24 To turn off the Parental Control Parental Control (limiting playback Press X/x to select “PLAYER t,” then Press X/x to select “STANDARD,” then function by children) press ENTER. press ENTER. Set “LEVEL” to “OFF” in Step 8. The selection items for “STANDARD” Playback of some DVD VIDEOs can be xIf you have not entered a are displayed.
  • Page 25: Settings And Adjustments

    If you connect the player with an AV WIDE MODE Switch to or from the wide remote is set. amplifier (receiver), you can control the mode of a Sony wide TV volume with the supplied remote. TV/VIDEO Switch the TV’s input source Code numbers of controllable AV...
  • Page 26: Settings For The Display

    If you select “OTHERS t” in “MENU,” 4:3 LETTER BOX GRAPHICS A preset picture stored in the “SUBTITLE,” and “AUDIO,” select and enter a Settings for the Display player appears in the background. language code from “Language Code List” (page 102) using the number buttons.
  • Page 27 xDIMMER xCD DIRECT The following settings are stored in memory Custom Settings by the Playback Memory function. (CUSTOM Adjusts the lighting of the front panel display. Eliminates the use of unnecessary circuits — ANGLE (page 64)* when playing CDs. This setting will be SETUP) BRIGHT Makes the front panel display...
  • Page 28: Settings For The Speakers

    • CENTER xDTS (DVD VIDEO only) Notes Settings for the Speakers • Even if you set “48kHz/96kHz PCM” in “AUDIO Selects the DTS signals to be output via the NONE If you do not connect a center speaker, SETUP” to “96kHz/24bit,” the sampling frequency DIGITAL OUT (OPTICAL or COAXIAL) (SPEAKER SETUP) select this.
  • Page 29: Additional Information

    The subtitle language cannot be appears on the screen and the front panel Technology that Sony developed to enjoy , Contact your Sony dealer or local authorized display. In this case, check the following changed. surround in a home using 4 or more speakers.
  • Page 30: Language Code List

    1393 Occitan 1528 Thai TV Virtual Surround (TVS) (page 60) 1403 (Afan)Oromo 1529 Tigrinya Bangla 1253 Icelandic Technology from Sony developed to produce 1067 Tibetan 1254 Italian 1408 Oriya 1531 Turkmen surround sound for home use using just a 1070 Breton...
  • Page 31: List Of Setup Display Items

    SCREEN SETUP (page 82) List of Setup Display Items TV TYPE 4:3 LETTER BOX 4:3 PAN SCAN 16:9 The default settings are underlined. SCREEN SAVER LANGUAGE SETUP (page 81) ENGLISH BACKGROUND JACKET PICTURE FRENCH PICTURE MEMORY SPANISH GRAPHICS PORTUGUESE BLUE BLACK MENU ENGLISH...
  • Page 32: Disassembly

    DVP-NS900V SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. 2-1. TOP CASE REMOVAL 2-3. FRONT PANEL BLOCK ASSY REMOVAL 4 Top case 6 Flexible flat cable (CN802) 2 Two tapping screws 3 Screw (B3) 1 Two screws (B3) 4 Claw 3 Two claws 2 Claw...
  • Page 33: Board Removal

    2-5. FR-182 BOARD REMOVAL 2-7. IF-87 BOARD REMOVAL 1 Flexible flat cable (FLI-001/FLI-002) (CN403) 3 Connector (CN201) 1 Flexible flat cable (FLR-002/FLR-003) 2 Two connectors (CN801) (CN405, 452) 4 Two screws (B3) 2 Two connectors (CN406, 409) 5 IF-87 board 1 Flexible flat cable (FIM-001/FIM-002) (CN407)
  • Page 34: Power Block Removal

    2-9. POWER BLOCK REMOVAL 2-11. AU-230 BOARD REMOVAL 1 Flexible flat cable (FMA-003/FMA-004) 2 Two connectors (CN101) 1 Connector (CN301, 351) (CN101) 4 Four screws (WHD B3) 3 Screw (B3) 3 Joint lever 2 Connector (CN251) 5 Power block 6 AU-230 board 2 Connector (CN201) 4 Six screws (B3)
  • Page 35: Board Removal (Except Aep, Uk, Russian)

    2-13. VP-57 BOARD REMOVAL 2-15. MECHANISM DECK REMOVAL (EXCEPT AEP, UK, Russian) 1 Flexible flat cable 1 Three screws (B3) (CN101) 2 Connector (CN102) 3 Screw (B3) 5 VP-57 board 2 Mechanism deck 4 Four screws (B3) 2-14. EV-14 BOARD REMOVAL 2-16.
  • Page 36: Internal Views

    2-17. INTERNAL VIEWS DC motor (loading) not supplied DC motor (loading) not supplied Optical pick-up (KHM-240AAA/J1RP) 8-820-144-06...
  • Page 37: Circuit Boards Location

    2-18. CIRCUIT BOARDS LOCATION RY-13 Power Block (RELAY) (HS15S1E) (EXCEPT US, Canadian, Mexican)/ Power Block (HS15S1U) (US, Canadian, Mexican) MS-81 (LOADING) FL-125 AU-230 (IF CON) (AUDIO/DIGITAL OUT COAXIAL) HP-134 (HEAD PHONE) VP-57 IF-87 (VIDEO) (Except AEP, UK, Russian)/ (INTERFACE CONTROL) EV-14 (VIDEO) (AEP, UK, Russian) FR-182...
  • Page 38: Block Diagrams

    DVP-NS900V SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM EXCEPT AEP, UK, RUS VP-57 BOARD (SEE PAGE 4-63 to 4-72) J302 S VIDEO OUT IC306 V, Y, C DVD 0 – 7 VIDEO IC102 BUFFER MB-101 BOARD VIDEO VIDEO OUT IC203 BUFFER (SEE PAGE 4-11 to 4-36)
  • Page 39: Rf/Servo Block Diagram

    DVP-NS900V 3-2. RF/SERVO BLOCK DIAGRAM IC201 tl (CD play) IC201 2 (DVD play) IC201 2 (CD play) IC201 tl (DVD play) IC201 rs (DVD play) IC201 rs (CD play) 500 mV/DIV 200 ns/DIV 200 mV/DIV 50 ns/DIV 200 mV/DIV 200 ns/DIV 500 mV/DIV 50 ns/DIV 100 mV/DIV 50 ms/DIV 500 mV/DIV 50 ms/DIV...
  • Page 40: Signal Process Block Diagram

    DVP-NS900V 3-3. SIGNAL PROCESS BLOCK DIAGRAM MB-101 BOARD (2/4) PCLK (SEE PAGE 4-13, 15, 17) PCLK WSAD 0 – 7 WSAD 0 – 7 IC303 SDI 0 – 7 SDI 0 – 7 16M DRAM AUDIO 1 (SEE PAGE 3-15) XSRQ XSRQ XAVSRQ...
  • Page 41: System Control Block Diagram

    DVP-NS900V 3-4. SYSTEM CONTROL BLOCK DIAGRAM MB-101 BOARD (3/4) (SEE PAGE 4-21, 23, 25, 31) • Abbreviation IC106 IC107 32M FLASH HD 8 – 15 : Russian NFBSY NFBSY IC404 NFCLE HA 0 – 21 HA 0 – 21 HA 0 – 21 ı...
  • Page 42: Video (1) Block Diagram

    DVP-NS900V 3-5. VIDEO (1) BLOCK DIAGRAM VP-57 BOARD (1/2) Q101 FL101 Q107 Q113 (SEE PAGE 4-63 to 4-72) CLKIN DAC A BUFFER L. P. F BUFFER IC102 wj IC102 rg IC102 VIDEO ENCODER S301 3.5 Vp-p (27 MHz) (INTERLACE) SCAN SELECT 830 mVp-p (H) SELECTABLE RV101...
  • Page 43: Video (2) Block Diagram

    DVP-NS900V 3-6. VIDEO (2) BLOCK DIAGRAM VP-57 BOARD (2/2) RY302 (SEE PAGE 4-69, 70, 71, 72) IC307 2 IC307 J303 1.5 Vp-p (H) Q318 MUTE IC308 2 IC308 1.5 Vp-p (H) VIDEO 1 RY301 COMPONENT Q319 (SEE PAGE 3-9) VIDEO OUT MUTE IC308 8 B-Y1...
  • Page 44: Video (3) Block Diagram

    DVP-NS900V 3-7. VIDEO (3) BLOCK DIAGRAM IC201 ef IC201 ef EV-14 BOARD (LINE : RGB mode) (LINE : S VIDEO mode) (SEE PAGE 4-77 to 4-82) IC201 RY201 VIDEO BUFFER V_IN 1.4 Vp-p (H) V_OUT 5 C_IN 1.7 Vp-p (H) R/C_OUT BLANKING IN 15 Y_IN...
  • Page 45: Audio (1) Block Diagram

    DVP-NS900V 3-8. AUDIO (1) BLOCK DIAGRAM MB-101 BOARD (4/4) (SEE PAGE 4-28, 29, 33, 35, 77) CN601 DSP1DII DSP2DO CDDOUT IC601 SPDIF 32 DSP2DII AUDIO DSP ACH12 160 DSP1CH12I 56 DSP2CH12I DSP2CH78O SDTI/DSDL AOUTL+ ALT+ IC603 ACH34 159 DSP1CH34I IC601 yl, <zvm AOUTL–...
  • Page 46: Audio (2) Block Diagram

    DVP-NS900V 3-9. AUDIO (2) BLOCK DIAGRAM AU-230 BOARD (SEE PAGE 4-45 to 4-48) CN101 J351 Q351 SPDIF COAXIAL BUFFER DIGITAL IC352 IC101 1 D IN 5.1CH FRONT OPTICAL AUDIO AMP J101 LOUT1+ – LOUT1– FRONT ROUT1+ – ROUT1– Q102 Q101 MUTE MUTE IC102...
  • Page 47: Interface Control Block Diagram

    DVP-NS900V 3-10. INTERFACE CONTROL BLOCK DIAGRAM IF-87 BOARD FL-125 BOARD (SEE PAGE 4-53) CN405 (SEE PAGE 4-57) S_LINK AUDIO 2 (SEE PAGE 3-17) A_MUTE IC701 CN701 REMOTE COMMANDER IFRST 21 BUZ /FRRST RECEIVER BZ701 BUZZER IFBSY CN406 BUSY VIDEO 2 V_MUTE 11 IR (SEE PAGE 3-11)
  • Page 48: Power (1) Block Diagram

    DVP-NS900V 3-11. POWER (1) BLOCK DIAGRAM HS15S1E BOARD IF-87 BOARD : EXCEPT US, CND, MX (SEE PAGE 4-85) (SEE PAGE 4-53) T101 HS15S1U BOARD : US, CND, MX CN201 Q211 CN401 PS402 D211 L211 (SEE PAGE 4-89) CN403 SW+11V EVER+11V EVER+11V POWER 2 US, CND, MX...
  • Page 49: Power (2) Block Diagram

    DVP-NS900V 3-12. POWER (2) BLOCK DIAGRAM FL-125 BOARD IC352 AU-230 BOARD (SEE PAGE 4-57) (SEE PAGE 4-45 to 4-48) OPTICAL DIGITAL US, CND, MX CN701 EVER+11V IC351 POWER 1 ND701 IC702 (SEE PAGE 3-21) FLUORESCENT +5V REG CN301 IC301 (1/2) Q704, 705 INDICATOR D301...
  • Page 50: Printed Wiring Boards And Schematic Diagrams

    DVP-NS900V DVP-NS900V SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING For schematic diagram: • Caution when replacing chip parts. BOARDS AND SCHEMATIC DIAGRAMS. New parts must be attached after removal of chip. (In addition to this, the necessary note is printed Be careful not to heat the minus side of tantalum capacitor, in each block.) because it is damaged by the heat.
  • Page 51: Frame Schematic Diagram

    DVP-NS900V 4-1. FRAME SCHEMATIC DIAGRAM FRAME (1) RY-13 BOARD CN604 +11V HARNESS(RI-056) CN301 AEP,UK,RUS CN603 AC_10V CN201 R-CORE ACOUT L N.C. EURO L ACOUT N TRANS AU-230 BOARD HARNESS EV-14 BOARD AC_10V (AE-055) CN201 EURO R CN601 ACIN N HP-134 CN351 EVER+3.3V ACIN L...
  • Page 52: Frame (2)

    DVP-NS900V FRAME (2) AEP,UK,RUS CN202 CN201 GND(E) EURO L V_IN V_OUT HARNESS GND(E) AU-230 BOARD (AE-055) GND(E) CN201 BLANKING_IN EURO R R_IN GND(E) GND(E) N.C. G_IN LINE 2 CN502 CN101 AVLINKI GND(E) FUNCTION_SW_IN B_IN A(L)IN GND(E) XRST XRST GND(A) A(L)OUT 27MVDA 27MCLK A(R)IN...
  • Page 53: Printed Wiring Boards And Schematic Diagrams

    DVP-NS900V 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS There are a few cases that the part isn't mounted in this model is printed on this diagram. MB-101 (SIGNAL PROCESS, SERVO) PRINTED WIRING BOARD – Ref. No.: MB-101 board; 2,000 series – MB-101 BOARD (SIDE A) CN101 CN102...
  • Page 54 DVP-NS900V MB-101 BOARD (SIDE B) D601 D602 D603 IC101 IC103 IC106 IC107 IC201 IC202 IC301 IC303 IC501 IC504 IC507 IC603 IC604 IC801 IC803 IC804 IC807 Q201 Q202 SIGNAL PROCESS, SERVO MB-101 4-10...
  • Page 55: Mb-101 (Rf Amp, Servo) Schematic Diagram

    DVP-NS900V The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que MB-101 (RF AMP, SERVO) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. Replace only with part number specified.
  • Page 56: Arp, Servo Dsp) Schematic Diagram

    DVP-NS900V MB-101 (ARP, SERVO DSP) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-101 board; 2,000 series – NO MARK:DVD/CD PLAY *:IMPOSSIBLE TO MEASURE THE MB-101 BOARD (2/13) D:DVD PLAY VOLTAGE AT THE MARKED POINTS. C:CD PLAY P:PAL DVD PLAY N:NTSC DVD PLAY...
  • Page 57: Mb-101 (Av Decoder) Schematic Diagram

    DVP-NS900V MB-101 (AV DECODER) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-101 board; 2,000 series – SIGNAL PATH MB-101 BOARD (3/13) VIDEO SIGNAL AUDIO NO MARK:DVD/CD PLAY SIGNAL D:DVD PLAY CHROMA Y/CHROMA C:CD PLAY MB-101 BOARD (6/13) *:IMPOSSIBLE TO MEASURE THE VOLTAGE AT THE MARKED POINTS.
  • Page 58: Bnr) Schematic Diagram

    DVP-NS900V MB-101 (BNR) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-101 board; 2,000 series – • Waveforms SIGNAL PATH 1 IC502 <z,/>, <z,x> MB-101 BOARD (4/13) VIDEO SIGNAL NO MARK:DVD/CD PLAY CHROMA Y/CHROMA XX MARK:NO MOUNT MB-101 BOARD (3/13) IC505 C544...
  • Page 59: Drive) Schematic Diagram

    DVP-NS900V MB-101 (DRIVE) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-101 board; 2,000 series – SIGNAL PATH MB-101 BOARD (5/13) NO MARK:DVD/CD PLAY D:DVD PLAY SPINDLE SERVO(SPEED AND PHASE) C:CD PLAY TRACKING SERVO DVD/CD CDV MB-101 BOARD (6/13) +3.3V SKEW SERVO DVD/CD...
  • Page 60: System Control) Schematic Diagram

    DVP-NS900V MB-101 (SYSTEM CONTROL) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-101 board; 2,000 series – MB-101 BOARD (6/13) NO MARK:DVD/CD PLAY D:DVD PLAY MB-101 BOARD +3.3V +3.3V C:CD PLAY (1/13,2/13,3/13,4/13,7/13, 9/13,10/13,11/13,12/13) MB-101 BOARD (8/13) MB-101 BOARD (3/13) IP_SW MB-101 BOARD (12/13)
  • Page 61: Clock Generator) Schematic Diagram

    DVP-NS900V MB-101 (CLOCK GENERATOR) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-101 board; 2,000 series – MB-101 BOARD (7/13) IC103 NO MARK:DVD/CD PLAY R109 FB101 D:DVD PLAY MB-101 BOARD (10/13) 27M38 FB103 C:CD PLAY 27MAVD MB-101 BOARD (3/13) C103...
  • Page 62: Flash Memory, Otp) Schematic Diagram

    DVP-NS900V MB-101 (FLASH MEMORY, OTP) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. *1: Either IC106 or IC107 is used. – Ref. No.: MB-101 board; 2,000 series – MB-101 BOARD (8/13) +3.3V XX MARK:NO MOUNT NO MARK:DVD/CD PLAY MB-101 BOARD (6/13) RB103 HAI0...
  • Page 63: Audio Dsp) Schematic Diagram

    DVP-NS900V MB-101 (AUDIO DSP) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. • Waveforms – Ref. No.: MB-101 board; 2,000 series – 1 IC601 yl, <zvm MB-101 BOARD (9/13) LRCK NO MARK:DVD/CD PLAY ACH12 D:DVD PLAY ACH34 MB-101 BOARD (3/13) C:CD PLAY P:PAL DVD PLAY ACH56...
  • Page 64: Mb-101 (2Ch/6Ch Dac) Schematic Diagram

    DVP-NS900V MB-101 (2ch/6ch DAC) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-101 board; 2,000 series – MB-101 BOARD (10/13) MB-101 BOARD (6/13) NO MARK:DVD/CD PLAY XDACS P:PAL DVD PLAY D:DVD PLAY N:NTSC DVD PLAY DSADML C:CD PLAY MB-101 BOARD (13/13)
  • Page 65: H3Ga) Schematic Diagram

    DVP-NS900V MB-101 (H3GA) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-101 board; 2,000 series – MB-101 BOARD (11/13) NO MARK:DVD/CD PLAY C420 C422 C423 IC404 K9F3208W0A-TCB0T 0.01u 0.01u 0.01u R447 NFBSY TEST N.C. N.C. R428 N.C.
  • Page 66: Mb-101 (Sacd Decoder) Schematic Diagram

    DVP-NS900V MB-101 (SACD DECODER) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. • Waveforms – Ref. No.: MB-101 board; 2,000 series – 1 IC806 qa NO MARK:DVD/CD PLAY P:PAL DVD PLAY MB-101 BOARD (12/13) D:DVD PLAY N:NTSC DVD PLAY C:CD PLAY *:IMPOSSIBLE TO MEASURE THE XX MARK:NO MOUNT...
  • Page 67: Dsd Dsp) Schematic Diagram

    DVP-NS900V MB-101 (DSD DSP) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-101 board; 2,000 series – • Waveforms 1 IC807 ik SIGNAL PATH R864 NO MARK:DVD/CD PLAY XBMCS MB-101 BOARD (13/13) D:DVD PLAY R865 AUDIO C:CD PLAY P:PAL DVD PLAY...
  • Page 68: Loading

    DVP-NS900V MS-81 (LOADING) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: MS-81 board; 1,000 series – There are a few cases that the part isn't mounted in this model is printed on this diagram. MS-81 BOARD M001 LOADING CN001 MOTOR JL001 LDM+...
  • Page 69: Printed Wiring Board

    DVP-NS900V FR-182 (FUNCTION SWITCH) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: FR-182 board; 1,000 series – RY-13 Power Block (RELAY) (HS15S1E) (EXCEPT US, Canadian, Mexican)/ Power Block (HS15S1U) (US, Canadian, Mexican) MS-81...
  • Page 70: Function Switch) Schematic Diagram

    DVP-NS900V FR-182 (FUNCTION SWITCH) SCHEMATIC DIAGRAM – Ref. No.: FR-182 board; 1,000 series – FR-182 BOARD CN801 TO FL EVER+3.3V JL801 PLAY_LED JL802 PAUSE_LED JL803 JOG_LED JL804 R803 R806 R809 JL805 FL-125 BOARD JL806 CN702 JL807 (SEE PAGE 4-57) JL808 JL809 JOG_CCW JL810...
  • Page 71 DVP-NS900V AU-230 (AUDIO/DIGITAL OUT COAXIAL) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: AU-230 board; 1,000 series – AU-230 BOARD CN101 Q101 RY-13 CN201 Q102 Power Block (RELAY)
  • Page 72: Audio) Schematic Diagram

    DVP-NS900V AU-230 (AUDIO) SCHEMATIC DIAGRAM – Ref. No.: AU-230 board; 1,000 series – SIGNAL PATH AU-230 BOARD (1/2) AUDIO NO MARK:DVD/CD PLAY SIGNAL D:DVD PLAY C:CD PLAY Q354 2SB709A-QRS-TX 11.5 D11.4/C-12.1 C359 AU-230 BOARD (2/2) R363 D10.7/C11.5 R365 Q354-353 R362 MUTE DRIVE D6.8/ D0/C11.5...
  • Page 73: Digital Out Coaxial) Schematic Diagram

    DVP-NS900V AU-230 (DIGITAL OUT COAXIAL) SCHEMATIC DIAGRAM – Ref. No.: AU-230 board; 1,000 series – C101 C109 R132 R101 R111 3900p 4700p AU-230 BOARD (2/2) R138 C124 R112 2400 R102 0.1u C125 Q101,102 R123 R129 C118 R152 100u MUTE 2400 470p NO MARK:DVD/CD PLAY D:DVD PLAY...
  • Page 74: Headphone

    DVP-NS900V HP-134 (HEADPHONE) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: HP-134 board; 1,000 series – There are a few cases that the part isn't mounted in this model is printed on this diagram. HP-134 BOARD SIGNAL PATH AUDIO SIGNAL FB501 AEP,UK,RUS...
  • Page 75 DVP-NS900V IF-87 (INTERFACE CONTROL) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: IF-87 board; 1,000 series – IF-87 BOARD RY-13 Power Block (RELAY) CN401 B-11 (HS15S1E) (EXCEPT US, Canadian, Mexican)/ CN402...
  • Page 76: Interface Control) Schematic Diagram

    DVP-NS900V IF-87 (INTERFACE CONTROL) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: IF-87 board; 1,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.
  • Page 77 DVP-NS900V FL-125 (IF CON) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: FL-125 board; 1,000 series – FL-125 BOARD (SIDE A) D702 D703 D707 B-10 D708 B-10...
  • Page 78: If Con) Schematic Diagram

    DVP-NS900V FL-125 (IF CON) SCHEMATIC DIAGRAM – Ref. No.: FL-125 board; 1,000 series – FL-125 BOARD NO MARK:DVD/CD PLAY D:DVD PLAY C:CD PLAY *:IMPOSSIBLE TO MEASURE THE C715 VOLTAGE AT THE MARKED POINTS. 0.01u CN701 JL701 IFRST JL703 R760 R745 S_LINK JL704 V_MUTE...
  • Page 79 DVP-NS900V VP-57 (VIDEO) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: VP-57 board; 3,000 series – – US, CND, MX, HK, KR – VP-57 BOARD (SIDE A) D301 D302 D303...
  • Page 80 DVP-NS900V VP-57 BOARD (SIDE B) CN101 CN102 D311 IC104 IC201 IC202 IC204 IC301 IC302 IC303 IC304 IC307 IC308 Q101 Q102 Q103 Q104 Q105 Q106 Q116 Q117 Q301 Q302 Q303 Q318 Q319 Q320 VIDEO VP-57 4-61 4-62...
  • Page 81: Progressive) Schematic Diagram

    DVP-NS900V VP-57 (PROGRESSIVE) SCHEMATIC DIAGRAM • See page 4-59 for printed wiring board. – Ref. No.: VP-57 board; 3,000 series – – US, CND, MX, HK, KR – VP-57 BOARD (1/5) NO MARK:DVD/CD PLAY D:DVD PLAY C:CD PLAY R113 BLO7 ADCLK SIGNAL PATH BLO7...
  • Page 82: Vp-57 (Video Encoder) Schematic Diagram

    DVP-NS900V VP-57 (VIDEO ENCODER) SCHEMATIC DIAGRAM • See page 4-59 for printed wiring board. – Ref. No.: VP-57 board; 3,000 series – – US, CND, MX, HK, KR – VP-57 BOARD (2/5) NO MARK:DVD/CD PLAY XRST VP-57 BOARD (4/5) D:DVD PLAY C:CD PLAY R146 Q107...
  • Page 83: I/P Converter) Schematic Diagram

    DVP-NS900V VP-57 (I/P CONVERTER) SCHEMATIC DIAGRAM • See page 4-59 for printed wiring board. – Ref. No.: VP-57 board; 3,000 series – – US, CND, MX, HK, KR – VP-57 BOARD (3/5) NO MARK:DVD/CD PLAY R201 XRST ADCLK R273 X201 GRE0 GRE0 66MHz...
  • Page 84: D/A Converter) Schematic Diagram

    6.3V R382 R379 +5V REG IC301 PQ05DZ5U VMUTE+ IC302 VP-57 BOARD (1/5) SIGNAL PATH DSEL -11V REG IC302 VIDEO SIGNAL VP-57 BOARD (1/5) L79M05TLL-SONY-TL CHROMA +11V(AUDIO) VP-57 BOARD (5/5) D310 RB491D-T146 D311 C301 C305 C306 C303 RB491D-T146 0.01u 0.01u 6.3V...
  • Page 85: Vp-57 (Video Buffer) Schematic Diagram

    DVP-NS900V VP-57 (VIDEO BUFFER) SCHEMATIC DIAGRAM • See page 4-59 for printed wiring board. – Ref. No.: VP-57 board; 3,000 series – – US, CND, MX, HK, KR – VP-57 BOARD (5/5) R647 R657 R662 S301 NO MARK:DVD/CD PLAY SELECTABLE INTERLACE VP-57 BOARD (1/5) IPSW/EUROVY...
  • Page 86: Relay

    DVP-NS900V RY-13 (RELAY) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: RY-13 board; 1,000 series – There are a few cases that the part isn't mounted in this model is printed on this diagram. RY-13 BOARD CN601 JL601 CN603 LF601 JL605 ACIN L...
  • Page 87 DVP-NS900V EV-14 (VIDEO) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: EV-14 board; 4,000 series – – AEP, UK, RUS – VIDEO EV-14 4-75 4-76...
  • Page 88: Ev-14 (Video Encoder) Schematic Diagram

    WIDE 2 IC102 rf EV-14 BOARD (2/3,3/3) RGBSEL R101 EV-14 BOARD (3/3) DISC/EXT EV-14 BOARD (2/3) +11V EV-14 BOARD (SIDE B) IC104 IC103 IC101 L79M05TLL-SONY-TL PQ05DZ5U BA033FP-E2 CN101 C-11 CN102 IC103 IC104 IC101 CN201 +5V REG -5V REG CN202 +3.3V REG...
  • Page 89: Ev-14 (Video Buffer) Schematic Diagram

    DVP-NS900V EV-14 (VIDEO BUFFER) SCHEMATIC DIAGRAM • See page 4-75 for printed wiring board. – Ref. No.: EV-14 board; 4,000 series – – AEP, UK, RUS – C145 C146 EV-14 BOARD (2/3) L103 C158 22uH L104 22uH R406 NO MARK:DVD/CD PLAY EV-14 BOARD (1/3) 2200 D:DVD PLAY...
  • Page 90: Euro Av) Schematic Diagram

    DVP-NS900V EV-14 (EURO AV) SCHEMATIC DIAGRAM • See page 4-75 for printed wiring board. – Ref. No.: EV-14 board; 4,000 series – – AEP, UK, RUS – EV-14 BOARD (3/3) R230 NO MARK:DVD/CD PLAY 0.5% L203 100uH -5V(ER) L202 100uH +5V(ER) 100uH L201...
  • Page 91: Aep, Uk, Hk, Kr, Rus

    DVP-NS900V HS15S1E (SWITCHING REGULATOR) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: HS15S1E board; 3,000 series – – AEP, UK, HK, KR, RUS – HS15S1E BOARD HS15S1E BOARD CN101...
  • Page 92: Aep, Uk, Hk, Kr, Rus

    DVP-NS900V HS15S1E (SWITCHING REGULATOR) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: HS15S1E board; 3,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.
  • Page 93 DVP-NS900V HS15S1U (SWITCHING REGULATOR) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: HS15S1U board; 5,000 series – – US, CND, MX – HS15S1U BOARD HS15S1U BOARD CN101 CN201...
  • Page 94 DVP-NS900V HS15S1U (SWITCHING REGULATOR) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: HS15S1U board; 5,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.
  • Page 95: Ic Pin Function Description

    DVP-NS900V SECTION 5 IC PIN FUNCTION DESCRIPTION...
  • Page 96 5-2 E...
  • Page 97: Test Mode

    DVP-NS900V SECTION 6 TEST MODE 6-1. GENERAL DESCRIPTION 6-3. SYSCON DIAGNOSIS The Test Mode allows you to make diagnosis and adjustment eas- The same contents as board detail check by serial interface can be ily using the remote commander and monitor TV. The instructions, checked from the remote commander.
  • Page 98 Submenu (2-4) Model Type Model code is displayed. Selecting 2 and subsequent items calls the submenu screen of each Error: Not detected. item. The model code read from the EEPROM is displayed with For example, if “5. Supply” is selected, the following submenu 2-digit hexadecimal number.
  • Page 99 4. Servo address, and read address are displayed in this order. How- ever, the message uses same template, and accordingly ex- (4-2) Servo DSP Check Data write → read, and accord check change Address and Data when reading. The following dis- play, for example, Error 12: Read data discord 0x9249, 0x2942 and 0x4294 are written to the RAM ad-...
  • Page 100 7. Video Check Items List (7-2) Color Bar AVD color bar command write → Video OUT 2) Version Error: Not detected. (2-2) Revision The command is transferred to the AVD, and the color bar (2-3) ROM Check Sum signals are output from video terminals. (2-4) Model Type They are output from all video terminals (Composite, Y/C, (2-5) Region...
  • Page 101: Drive Auto Adjustment

    1. DVD-SL (single layer) 6-4. DRIVE AUTO ADJUSTMENT [ENTER] Select , insert DVD single layer disc, and press key, and the adjustment will be made through the following steps, then On the Test Mode Menu screen, press key on the remote com- adjusted values will be written to the EEPROM.
  • Page 102 2. CD 3. DVD-DL (dual layer) [ENTER] [ENTER] Select , insert CD disc, and press key, and the adjust- Select , insert DVD dual layer disc, and press key, ment will be made through the following steps, then adjusted val- and the adjustment will be made through the following steps, then ues will be written to the EEPROM.
  • Page 103: Drive Manual Operation

    0. Disc Check Memory 6-5. DRIVE MANUAL OPERATION Disc Check On the Test Mode Menu screen, select , and the manual opera- tion menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. 1.
  • Page 104 Sled Turn ON/OFF the sled servo. Disc Type 1. Disc Type Auto Check CLVA Turn ON/OFF normal servo of spindle 2. DVD SL 12 cm servo. 3. DVD DL 12 cm 4. CD 12cm FCS. Srch Apply same voltage as that of focus 5.
  • Page 105 4. Manual Adjustment Auto EQ Auto L.F. Offset Adjusts loop filter offset. Manual Adjustment 1. TRK. Offset 2. Focus Gain Auto Group Delay 3. TRK. Gain 4. Focus Offset 5. Focus Balance 6. Memory Check 6. L.F. Offset 7. EQ BOOST EEPROM DATA 1 -–...
  • Page 106: Mecha Aging

    How to see Emergency History 6-6. MECHA AGING ### Mecha Aging ### Press OPEN key 1: Emergency Code 2: Don't Care These codes are used for verification of software designing. 3: Historical order 1 to 9 Abort: STOP key Emergency Codes List 10: Communication to IC202 (MB-101 board) failed.
  • Page 107: Version Information

    6-8. VERSION INFORMATION 6-10. IF CON SELF DIAGNOSTIC FUNCTION 1. FL-125 BOARD (IF CON) TEST MODE ## Version Information ## The front board test mode is the IF CON self diagnostic mode. IF con. Ver : x. xxx (xxxx) The IF CON can diagnose the functions of the front panel boards Group that the IF CON controls.
  • Page 108 2-2. Operation of Auto Self Check When the Self Check mode becomes active at the AC Power ON or by key input, the test display of the following steps (1) to (4) is repeated. (1) FLD and LED all ON (for 5 seconds) HOUR TRACK CHAP...
  • Page 109 2-3. Each Self Check Function Each Self Check function tests the FLD display, LED display, and key input. IC703: Pin No. (Signal) Input Voltage [V] (AD1) (AD4) (AD5) (AD6) (CURSOR) Pin ea Pin ef Pin eg Pin eh Pin ej STOP PLAY OPEN/CLOSE...
  • Page 110 [PLAY] Key code display (at input of key, Key code: 0Ah) TRACK INDEX ANGLE NTSC HOUR GROUP TITLE CHAP PROGRESSIVE V-PART MULTI MPEG SHUFFLE DMIX P.PCM REPEAT 1 Digital PGM A-B At input of faulty voltage TRACK HOUR GROUP TITLE CHAP INDEX ANGLE...
  • Page 111 2-3-4. Communication Monitoring Display The communication state is monitored and displayed while the key name on the main unit and the remote commander is displayed. When the communication to the System Controller failed, VIDEO CD, DVD, and CD segments turn on. Communication error display (at no key input) TRACK INDEX...
  • Page 112 2-3-6. FLD Grid Test Display and SHUTTLE Click Operation Test 2-3-6-1. Transition Keys in Self Check Mode [UP] • on the main unit and the remote commander • SHUTTLE on the remote commander during Grid Test display (This model does not provide JOG/SHUTTLE, and therefore use another DVD remote commander having the JOG/ SHUTTLE) 2-3-6-2.
  • Page 113 ( 10G, 12G ) ( 3G~14G ) ANODE CONNECTION 6-17...
  • Page 114: Troubleshooting

    1-2. CPUCK (33 MHz) is outputted 6-11. TROUBLESHOOTING (communication with ROM is normal) • AVD (IC502) check 6-11-1. Cannot Enter Test Mode Using an oscilloscope, measure the SDCLKO (<zv.> pin) of the You cannot enter the Test mode when either button has been pressed AVD (IC502) to check that 95 MHz is outputted.
  • Page 115 3. At button ON, LED lights in green but returns to red (standby state) after several seconds (e.g. it returns to standby state after “SONY DVD” was displayed) There is no regularity between faulty parts and timing when the set returns to the standby state).
  • Page 116: Electrical Adjustment

    CN201 pin qs with delay mode Specification 5.0 ± 0.3 Vdc 3) Frequency counter (over 8 digits) 4) Digital voltmeter SW +11 V Check 5) Standard commander (RMT-D139P/D140A/D140E/D140P) Test point CN201 pin 6, 7 6) DVD reference disc +1.0 Specification 11.5 HLX-501 (J-6090-071-A) (dual layer) (NTSC) –1.5...
  • Page 117: Adjustment Of Video System

    7-2. ADJUSTMENT OF VIDEO SYSTEM 3. Checking S Video Output S-C <Purpose> This checks whether the S-C satisfies the NTSC/PAL Standard. If 1. Video Level Adjustment (MB-101 BOARD) it is not correct, the colors will be too dark or light. <Purpose>...
  • Page 118: Checking Component Video Output B-Y

    5. Checking Component Video Output B-Y 7. Checking RGB Output R (AEP, UK, RUS Model) (Except AEP, UK, RUS Model) <Purpose> <Purpose> This checks RGB output R. If it is incorrect, pictures will not be This checks component video output B-Y. If it is incorrect, cor- displayed correctly in spite of connection to the TV with an EURO rect colors will not be displayed when connected to, for instance, AV connecting cord.
  • Page 119: Checking Rgb Output B

    9. Checking RGB Output B (AEP, UK, RUS Model) <Purpose> This checks RGB output B. If it is incorrect, pictures will not be displayed correctly in spite of connection to the TV with an EURO AV connecting cord. In test mode, Push for Syscon Diagnosis and Mode...
  • Page 120: Adjustment Related Parts Arrangement

    7-3. ADJUSTMENT RELATED PARTS ARRANGEMENT MB-101 BOARD (SIDE A) RV501 IC502 VIDEO LEVEL HS15S1E/HS15S1U BOARDS (SIDE A) CN201 7-6 E...
  • Page 121: Repair Parts List

    • Items marked “*” are not stocked since they are • Accessories and packing materials are given in the 4-942-568-41 EMBLEM (NO.5), SONY (for BLACK) 3-070-865-41 CASE, TOP (GOLD) Replace only with part number speci- seldom required for routine service. Some delay last of the electrical parts list.
  • Page 122: Chassis Assembly

    8-1-2. CHASSIS ASSEMBLY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-970-608-11 SUMITITE (B3), +BV 1-823-270-11 CABLE, FLEXIBLE FLAT (FMA-003) 3-970-608-51 SUMITITE (B3), +BV (US, CND, MX, HK, KR) * 53 A-6065-764-A IF-87 BOARD, COMPLETE 1-823-270-21 CABLE, FLEXIBLE FLAT (FMA-004) (US, CND, MX, HK, KR) (AEP, UK, RUS) * 53...
  • Page 123: Mechanism Deck Assembly

    8-1-3. MECHANISM DECK ASSEMBLY not supplied not supplied not supplied not supplied not supplied not supplied not supplied supplied supplied supplied not supplied not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety.
  • Page 124: Electrical Parts List

    AU-230 8-2. ELECTRICAL PARTS LIST NOTE: The components identified by mark • Due to standardization, replacements in the • Items marked “*” are not stocked since they 0 or dotted line with mark 0 are parts list may be different from the parts speci- are seldom required for routine service.
  • Page 125 AU-230 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC352 8-749-017-80 IC GP1FA551TZ C251 1-127-718-91 ELECT MELF 100uF C252 1-127-718-91 ELECT MELF 100uF < JACK > C255 1-127-719-91 ELECT MELF 220uF C256 1-127-719-91 ELECT MELF 220uF J101 1-785-489-11 JACK, PIN 6P (5.1CH OUTPUT) C257...
  • Page 126 AU-230 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R120 1-208-782-11 METAL CHIP 0.5% 1/10W R209 1-216-660-11 METAL CHIP 2.4K 0.5% 1/10W R121 1-208-782-11 METAL CHIP 0.5% 1/10W R210 1-216-660-11 METAL CHIP 2.4K 0.5% 1/10W R122 1-208-782-11 METAL CHIP 0.5% 1/10W...
  • Page 127 AU-230 EV-14 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R360 1-208-798-11 METAL CHIP 4.7K 0.5% 1/10W C141 1-127-956-21 FILM CHIP 0.1uF R361 1-208-798-11 METAL CHIP 4.7K 0.5% 1/10W R362 1-208-806-11 METAL CHIP 0.5% 1/10W C142 1-126-947-11 ELECT 47uF R363...
  • Page 128 8-729-230-49 TRANSISTOR 2SC2712-YG-TE85L IC101 8-759-460-72 IC BA033FP-E2 Q201 8-729-421-19 TRANSISTOR UN2213-TX IC102 8-759-684-19 IC ADV7190KST IC103 8-759-521-90 IC PQ05DZ5U Q202 8-729-424-08 TRANSISTOR UN2111-TX IC104 8-759-667-17 IC L79M05TLL-SONY-TL Q203 8-729-421-19 TRANSISTOR UN2213-TX IC105 8-759-684-20 IC LA7104M-TLM Q204 8-729-424-08 TRANSISTOR UN2111-TX 8-10...
  • Page 129 EV-14 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q205 8-729-421-22 TRANSISTOR UN2211-TX R156 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W Q206 8-729-421-19 TRANSISTOR UN2213-TX R157 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W Q207 8-729-424-08 TRANSISTOR UN2111-TX R158 1-208-790-11 METAL CHIP 2.2K 0.5%...
  • Page 130 EV-14 FL-125 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R236 1-216-065-91 RES-CHIP 4.7K 1/10W < BUZZER > R237 1-216-065-91 RES-CHIP 4.7K 1/10W BZ701 1-529-986-11 BUZZER, VOLTAGE R238 1-216-065-91 RES-CHIP 4.7K 1/10W R239 1-216-065-91 RES-CHIP 4.7K 1/10W <...
  • Page 131 FL-125 FR-182 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < COIL > R750 1-216-073-91 RES-CHIP 1/10W R751 1-216-097-11 RES-CHIP 100K 1/10W L701 1-400-096-21 INDUCTOR 47uH R753 1-216-073-91 RES-CHIP 1/10W < FLUORESCENT INDICATOR > R754 1-216-073-91 RES-CHIP 1/10W R755 1-216-073-91 RES-CHIP...
  • Page 132 FR-182 HP-134 IF-87 MB-101 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < SWITCH > C408 1-163-021-91 CERAMIC CHIP 0.01uF S801 1-771-349-21 SWITCH, KEYBOARD (H) C410 1-126-916-11 ELECT 1000uF 6.3V S802 1-771-349-21 SWITCH, KEYBOARD (DISPLAY) C411 1-163-021-91 CERAMIC CHIP 0.01uF S803...
  • Page 133 MB-101 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C103 1-126-209-11 ELECT CHIP 100uF C256 1-165-176-11 CERAMIC CHIP 0.047uF C104 1-162-970-11 CERAMIC CHIP 0.01uF C257 1-165-176-11 CERAMIC CHIP 0.047uF C105 1-162-970-11 CERAMIC CHIP 0.01uF C258 1-162-970-11 CERAMIC CHIP 0.01uF C106 1-162-917-11 CERAMIC CHIP...
  • Page 134 MB-101 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C420 1-162-970-11 CERAMIC CHIP 0.01uF C611 1-162-970-11 CERAMIC CHIP 0.01uF C421 1-162-970-11 CERAMIC CHIP 0.01uF C612 1-162-970-11 CERAMIC CHIP 0.01uF C422 1-162-970-11 CERAMIC CHIP 0.01uF C613 1-162-970-11 CERAMIC CHIP 0.01uF C423 1-162-970-11 CERAMIC CHIP...
  • Page 135 MB-101 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C840 1-162-970-11 CERAMIC CHIP 0.01uF FL804 1-234-177-21 FILTER, CHIP EMI C841 1-162-970-11 CERAMIC CHIP 0.01uF C842 1-162-970-11 CERAMIC CHIP 0.01uF FL805 1-234-177-21 FILTER, CHIP EMI C843 1-162-970-11 CERAMIC CHIP 0.01uF <...
  • Page 136 MB-101 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R118 1-216-833-11 METAL CHIP 1/16W R170 1-216-864-11 SHORT R119 1-216-797-11 METAL CHIP 1/16W R171 1-216-833-11 METAL CHIP 1/16W R120 1-216-797-11 METAL CHIP 1/16W R121 1-216-797-11 METAL CHIP 1/16W R172 1-216-821-11 METAL CHIP...
  • Page 137 MB-101 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R251 1-216-841-11 METAL CHIP 1/16W R341 1-216-829-11 METAL CHIP 4.7K 1/16W R252 1-216-839-11 METAL CHIP 1/16W R342 1-216-833-11 METAL CHIP 1/16W R253 1-218-889-11 METAL CHIP 0.5% 1/10W R343 1-216-829-11 METAL CHIP 4.7K...
  • Page 138 MB-101 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R536 1-216-797-11 METAL CHIP 1/16W R809 1-216-864-11 SHORT R537 1-216-864-11 SHORT R810 1-216-833-11 METAL CHIP 1/16W R540 1-216-809-11 METAL CHIP 1/16W R811 1-216-833-11 METAL CHIP 1/16W R541 1-216-809-11 METAL CHIP 1/16W R542...
  • Page 139 MB-101 MS-81 POWER BLOCK (HS15S1E) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R874 1-216-864-11 SHORT C223 1-126-947-11 ELECT 47uF R875 1-216-864-11 SHORT C301 1-126-961-11 ELECT 2.2uF R876 1-216-864-11 SHORT C311 1-111-087-11 ELECT 330uF R877 1-216-809-11 METAL CHIP 1/16W C313 1-126-947-11 ELECT...
  • Page 140 POWER BLOCK (HS15S1E) POWER BLOCK (HS15S1U) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark <IC LINK > < DIODE > 0 P311 0 D101 9-885-015-62 LINK, IC (1A/60V) 9-885-000-79 DIODE S1WBA60 0 P611 9-885-015-62 LINK, IC (1A/60V) D104 8-719-062-66 DIODE HZS2C3-TE D105...
  • Page 141 POWER BLOCK (HS15S1U) RY-13 VP-57 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < SWITCH > C123 1-162-970-11 CERAMIC CHIP 0.01uF 0 SW101 9-885-012-83 SWITCH (POWER) C124 1-162-970-11 CERAMIC CHIP 0.01uF C125 1-162-970-11 CERAMIC CHIP 0.01uF <...
  • Page 142 IC204 8-759-271-88 IC TC7SHU04FU-TE85R C336 1-126-205-11 ELECT CHIP 47uF 6.3V IC301 8-759-521-90 IC PQ05DZ5U C337 1-162-970-11 CERAMIC CHIP 0.01uF IC302 8-759-667-17 IC L79M05TLL-SONY-TL C338 1-126-205-11 ELECT CHIP 47uF 6.3V C339 1-126-205-11 ELECT CHIP 47uF 6.3V IC303 6-700-010-01 IC ADV7196AKS C340 1-127-956-21 FILM CHIP 0.1uF...
  • Page 143 VP-57 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q302 8-729-230-49 TRANSISTOR 2SC2712-YG-TE85L R142 1-216-821-11 METAL CHIP 1/16W Q303 8-729-230-49 TRANSISTOR 2SC2712-YG-TE85L R143 1-216-821-11 METAL CHIP 1/16W R144 1-216-821-11 METAL CHIP 1/16W Q304 8-729-216-22 TRANSISTOR 2SA1162-YG-TE85L R146 1-216-801-11 METAL CHIP 1/16W...
  • Page 144 VP-57 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R211 1-216-845-11 METAL CHIP 100K 1/16W R272 1-216-828-11 METAL CHIP 3.9K 1/16W R212 1-216-845-11 METAL CHIP 100K 1/16W R273 1-216-864-11 SHORT R213 1-216-845-11 METAL CHIP 100K 1/16W R274 1-216-864-11 SHORT R214...
  • Page 145 VP-57 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R367 1-216-821-11 METAL CHIP 1/16W < VARIABLE RESISTOR > R368 1-216-821-11 METAL CHIP 1/16W R370 1-216-841-11 METAL CHIP 1/16W RV101 1-223-582-11 RES, ADJ, CARBON 470 (N LEVEL) R372 1-216-841-11 METAL CHIP 1/16W...
  • Page 146 (US, CND, MX, KR) 1-476-926-31 REMOTE COMMANDER (RMT-D140P) (BLACK: AEP, UK) 1-476-926-41 REMOTE COMMANDER (RMT-D140E) (HK) 1-476-926-51 REMOTE COMMANDER (RMT-D139P) (SILVER: AEP, UK, RUS) 1-575-334-41 CORD, CONNECTION 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (UK, HK) 1-776-078-31 CORD, CONNECTION (US, CND, MX, HK, KR)
  • Page 147 DVP-NS900V Sony Corporation 2001I0500-1 9-929-712-11 Home Video Campany © 2001. 9 – 214 – Published by Quality Assurance Dept.

This manual is also suitable for:

Dvp-ns900vRmt-d140aRmt-d140eRmt-d140p