Electromagnetic Fields (Emf); Before First Use; Installing The Machine - Saeco bravista espresso User Manual

Table of Contents

Advertisement

ENGLISH
8
Caution
-
Always put the machine on a flat and stable surface.
Keep it in an upright position (also during transport).
-
Do not place the machine on a hotplate or directly next to a hot oven,
heater or similar source of heat.
-
Only use the original Caffitaly branded capsules. Neither use capsules
from other manufactures, nor damaged or misshapen capsules, and
never fill capsules or the machine with ground coffee or instant coffee,
as this will damage the machine. In these cases, any necessary repairs
due to damage are not covered by the guarantee.
-
Descale the machine regularly.
-
If you do not clean and descale the machine, you run the risk that the
machine stops working and that your guarantee becomes invalid.
-
Never fill the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the machine.
-
Do not use aggressive cleaning agents, solvents or chemicals to clean
the machine.
-
Do not keep the machine at temperatures below 0°C. Water left in
the heating system may freeze and cause damage.
-
This machine is intended for normal household use only. It is not
intended for use in environments such as staff kitchens, shops, offices,
farms or other work environments. Nor is it intended to be used
by clients in hotels, motels, bed and breakfasts and other residential
environments.
-
Always use fresh water when you use the machine. Empty the water
tank if you are not going to use the machine for a long time.
-
Always make sure that the drip tray and the used capsule drawer are
inserted when you use the machine.

Electromagnetic fields (EMF)

This machine complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.

Before first use

Installing the machine

1
Remove all packaging material from the machine.
2
Place the machine on a table or worktop away from the tap, the sink
and heat sources.
3
Put the plug in the wall socket.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents