Advertisement
Note: Please insert two fresh AA batteries and SD / SDHC Memory card to operate the camera
Camera works with SD/SDHC Memory cards up to 8GB capacity
a) Installing Batteries
Press the Battery Cover Release Button
alkaline batteries. Note polarity on battery terminals. Slide up and close the battery cover.
b) Installing SD/SDHC Memory Card
Insert the SD/SDHC Memory card into the SD/MMC Card Slot. Check card's alignment according
to position diagram on the camera before inserting.
Push it down until the card stays latched. Do not force card during
SD/SDHC card and camera as well.
Push and release inserted card when you wish to remove or replace the card; note that inserting /
removing the SD Memory card should only be done when the camera is OFF.
Note that the SD/SDHC Card has a tiny LOCK switch on the side. Set the switch on the card to un-LOCK; only
this un-locked position will allow you to store recorded videos and still pictures on the SD/SDHC Memory
Card.
c) Power the camera ON
Press and hold down the Power ON/OFF Button until LCD panel shows images or scene; now the camera is
turned ON
and slide down / remove the battery cover
4
. Insert two new AA
– forcing may damage
insertion
Advertisement
