Related Manuals for Jazz Z40
Summary of Contents for Jazz Z40
- Page 2 FCC part 15.21 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC part 15.105 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 3 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help. Pertinent testing documentation is available for verification. Lens Macro switch Shutter key Busy light Power key OK key...
- Page 4 Speaker Wrist strap loop Wrist strap hole Zoom in key Zoom out key USB/TV out port LED light Self timer light (red LED) Tripod socket SD card slot LCD Screen Please insert three fresh AAA batteries and SD/SDHC memory card to NOTE: operate the camera 1.
- Page 5 1. Open the battery lid 2. Insert three AAA alkaline batteries according to the terminals polarity location. 3. Insert the front end of the battery lid into the battery latch, press the back end of the battery lid and then press the lid securely closing the battery compartment. 2.
- Page 6 1. Normal setting is suitable for shooting subjects located 5 feet or more away from the camera is suitable for shooting close-up subjects 6” – 10”away. 2. Macro setting 4. Power ON / OFF the camera 1. Power ON: press the Power key for a second or two to turn the camera ON. 2.
- Page 7 5. Selecting the MODE of the camera When activated, the camera is set in the Video (recording) mode. Press the MODE key to change or select desired mode: Video (default mode) – recording video clips Camera mode – taking still photos, images Playback mode –...
- Page 8 To leave the date and time unaltered, press Left key and then OK key to Exit setup mode. 7. Indicators / LED lights: Busy light - the light will turn on when the camera is busy recording video, capturing photo, processing data, or being connected to computer. LED light –...
- Page 9 Recording the Video clip 1. Open the LCD screen. 2. Press / hold the Power key and turn the camera ON 3. Press the Shutter key to start recording video 4. To stop recording, press the Shutter key again. Note that if the memory card is full, camera will stop recording by itself. 5.
- Page 10 Changing the resolution setting of video Press OK button to open the menu. Press Up or Down Direction key to select ‘Movie Size’ option. Press Right Direction key. Press Up or Down Direction key to select the required resolution setting: 640 x 480 or 320 x 240.
- Page 11 Shooting 1. Press / hold the Power key to turn the camera ON 2. Press the Mode key once to select the Camera mode. 3. Press the Shutter key to take a still picture NOTE: Please note that recorded video and images appear narrower on camera LCD screen than actual recorded scene.
- Page 12 delay self-timer’ option on the sub-menu. Then press OK button to confirm the Press OK button again to exit the menu. A ‘2 sec delay self timer’ or ’10 sec delay selection. self timer’ icon will be displayed on LCD screen. Method 2: Press Left Direction key and a ’10 sec delay self timer’...
- Page 13 Press Up or Down Direction key to select ‘Effect’ option. Press Right Direction key. Press Up or Down Direction key to select the required effect: Normal; B&W (Black and White); Sepia Negative. Press OK button to confirm the selection. Then press OK button to exit the menu. 10.
- Page 14 to view the image. To resume normal preview mode, press OK button. Press OK button to open the menu, you will see several options: Lock: You can lock/unlock the photo/video files that you choose. Delete: You can delete one/all files. Slide Show: You can setup the Slide Show and activate it.
- Page 15 Thumbnail mode Note: : This icon indicates recorded Video (AVI file) : This icon indicates still picture (JPG file) with added voice Memo. No icon is displayed on still pictures. • In PLAYBACK mode, press Zoom Out Key (adjacent to LCD screen) selecting the “thumbnail”...
- Page 16 Playing recorded video Select desired video record (see “film camera” icon on the LCD screen) Press the Shutter key to start playing recorded video, press Shutter key again to stop playing. Add voice memo on photo file Switch the camera to playback mode. Browse to the photo you wish to add voice memo.
- Page 17 Note: The maximum time of voice memo recorded is 30 seconds. Play Photo(with voice memo) file Select the photo with voice Memo in Playback mode; Press Shutter key to start playing the voice Memo of the selected photo (with voice memo) file: Press OK key to stop playing the voice Memo, UP key to pause/resume playing the voice Memo.
- Page 18 important memories or data before formatting the memory card. 2 The “My image” menu can be activated after you have set “Start-up Image” function. 11. Setup the camera 1. Press OK button then press Right Direction key to enter Setup Menu. 2.
- Page 19 Press OK button and select ‘Start-up Ima’ option by pressing Up Down Direction key. Press Right Direction key and a sub-menu appears on LCD screen. Select ‘Set’ Option by pressing Up Down Direction key and then press OK button to confirm. Press OK button again and then press Right Direction key to enter Setup Menu.
-
Page 20: Uploading Your Video Clips To Youtube
Connect to PC Use supplied USB cable and connect camera to the computer. Download files from the camera to the computer: After connecting the camera to PC, a removable disc icon will appear in the window of “My Computer”. The photos/video files you have taken will be saved in the file folder \ DCIM\ 100MEDIA in the removable disc. - Page 21 Insert the CD-ROM into the computer CD-ROM drive. The auto-run screen will appear. Click “Install MediaImpression” （If the screen does not appear as the auto-run, please click on SoftwareInstaller.exe under the CD-ROM drive icon on the computer.） Follow on-screen instructions and complete installation...
- Page 23 After installation, please restart the computer. Run MediaImpression : icon on the desktop or follow “Start → Programs” to open: Double click the MediaImpression After starting MediaImpression, click “Import” to import the media.
- Page 24 Choose the video camera storage and choose the output location.
- Page 25 Choose require file and click the import, selected file will be stored in the output location. Click “Go to start page” to return the main screen, click the “Video” or “All media” to use the “YouTube” function.
- Page 26 Choose file and click the “upload to YouTube”. Enter your username and password to login to YouTube, execute upload.
- Page 27 Video resolution VGA: 640x480(30fps), QVGA: 320×240(30fps) Picture resolution 640×480 (default) Lens F3.1 f=6.5mm Focus settings 15cm~25cm (Macro) / 140cm~infinity (standard mode) Digital zoom 4× LCD display screen 1.44〞TFT LCD Memory card support Maximum 8GB Video storage VGA: Up to hours approximately with 8GB SD/MMC card Still Image storage...
-
Page 28: System Requirements
System Requirements Operating System Microsoft Windows ME, 2000, XP, Vista, 7 Central Processing unit Intel Pentium III 1GHz or CPU of equal or higher performance Memory 256 MB or higher Sound Card, Display Card The sound card and the display card shall support DirectX8 or higher version.
Need help?
Do you have a question about the Z40 and is the answer not in the manual?
Questions and answers
I don't have the cd to download the program for Z40 so is there another way that can be done