Removing The Media-Bay Bezel; Working With Adapters - IBM eServer 250 xSeries User Reference Manual

Removing the media-bay bezel

Working with adapters

Media-bay bezel
To remove the media-bay bezel:
1. Release the two tabs at the bottom edge of the media-bay bezel and pull the
bottom of the bezel slightly away from the server.
2. Pull the media-bay bezel down to release the two tabs at the top edge of the bezel.
Store the bezel in a safe place.
You can install up to six PCI adapters in the expansion connectors on the processor
board.
Your server comes with an integrated super video graphics array (SVGA) video
controller, which is not removable. If you want to disable this controller and use a
video adapter instead, you can install a video adapter in an expansion slot. When you
install a PCI video adapter, the server BIOS automatically disables the integrated
video controller.
Note: Video adapters are supported in all six PCI slots.
Chapter 5. Installing options
41