Gigaset A400 User Manual page 5

Initial charging and discharging of the batteries
The correct charge status can only be displayed if the batteries are first fully charged and dis-
charged.
¤ Charge the handset in the base for 6 hours.
Please note
The handset must only be placed in the designated Gigaset A400 base or the correspond-
ing charging cradle.
¤ After charging, remove the handset from the base and only replace it when the batteries
are fully discharged.
Please note
u The handset is pre-registered with the base. If you have purchased a model with mul-
tiple handsets, all handsets will already be registered with the base. You do not need
to register the handset again.
u After the first battery charge and discharge, you may place your handset in the charger
after every call.
u Always repeat the charging and discharging procedure if you remove the batteries
from the handset and reinsert them.
u The batteries may warm up during charging. This is not dangerous.
u After a while, the charge capacity of the batteries will decrease for technical reasons.
Changing the display language
If you do not understand the language that has been set, press:
421
q
Menu ¤ ¤
a
¤
(press and hold to return to idle status)
5
6 h
‰
Select language ¤ OK (
= selected)