Adding Admin Accounts; Adding User Accounts - D-Link DSN-1100 X Stack User Manual

2.3.2 Adding Admin Accounts

An admin account consists of a unique user name and password, and a selection to grant
permission for managing accounts.
To add admin accounts:
1. Click System Administration in the View panel.
2. Click the Settings tab.
The Settings tab appears in the Detail Tabs area (see Figure 2-10 on page 20).
3. Click the User Accounts button on the left side of the Settings tab:
The Settings tab displays your user account settings (an example is shown in Figure 2-11
on page 21).
4. In the User Name field, replace the name shown with the name of the admin whose
account you are creating.
5. Confirm that Allow Modify Users is checked. (If it is not checked, check it.)
6. In the New Password field, enter the case-sensitive password that this admin must
specify to log in to the xStack Storage Management Center.
The Confirm New Password field becomes available.
7. In the Confirm New Password field, re-enter the same case-sensitive login password that
you typed in the previous step.
8. Click the Add button.
The admin account is added to the list at the left side of the tab.
9. To add more admin accounts, repeat steps 4 through 8.

2.3.3 Adding User Accounts

A user account consists of a unique user name and password. Individuals with user accounts
can modify passwords only.
To add user accounts:
1. In Volume View, click System Administration in the View panel.
2. Click the Settings tab.
The Settings tab appears in the Detail Tabs area (see Figure 2-10 on page 20).
3. Click the User Accounts button on the left side of the Settings tab:
22 Chapter 2 Getting Started
For security, each typed password character appears as a bullet (●). For
future reference, write the user names and corresponding passwords on a
piece of paper and keep the paper in a safe place.