Understanding The Network Settings View - D-Link DSN-1100 X Stack User Manual

6.1 Understanding the Network Settings View

In the Network Settings View, the Main Display shows the IP address and connection status of
the xStack Storage management port, Ethernet ports, and Link Aggregate Groups (LAGs).
If you click a management port in the Main Display, the Management Port tab lets you

view or change the network settings for the selected port and the Network Actions
panel allows you to ping from that management port.
If you click an Ethernet (iSCSI) port in the Main Display, the Port tab shows the settings

for the selected port and lets you change the MTU size. The Network Actions panel
allows you to create a portal on the selected port, replace the port with a VLAN-enabled
port, and group ports.
If you click a LAG, the Link Aggregation Group (LAG) tab shows information about the

LAG and lets you change the LAG's MTU setting.
If you click an IP address below an Ethernet port in the Main Display, the Portal tab

shows the status of the selected portal. The Network Actions panel allows you to ping
from or delete the portal.
86 Chapter 6 Managing Management and Ethernet Ports and Portals
Figure 6-1. Example of the Network Settings View
If You Select This
Management Port...
Information About the Port
Appears Here