This "V" Indicates That
the Port Selected in the
Main Display is VLAN
Enabled
When you VLAN-enable a port or LAG, the portal information associated with the port or LAG
is deleted prior to the port or LAG joining the VLAN. As a result, any IP address associated
with the port or LAG is removed. The same scenario occurs if a VLAN-enabled port or LAG is
removed from the VLAN.
6.6.1 VLAN-Enabling a Port
To VLAN-enable a port:
1. In the Network Settings View, click an Ethernet port in the Main Display.
2. Perform one of the following steps:
6.6.2 Removing a Port from a VLAN
If you no longer want a port to participate in a VLAN:
1. In the Network Settings View, click a VLAN-enabled Ethernet port in the Main Display.
2. Perform one of the following steps:
xStack Storage Management Center Software User's Guide
Figure 6-11. Example of a VLAN-Enabled Port
–
On the Network menu, click Replace Port with VLAN enabled Port.
Click Replace Port with VLAN enabled Port in the Network Actions panel.
–
Press the right mouse button and click Replace Port with VLAN enabled Port from
–
the shortcut menu.
On the Network menu, click Replace VLAN enabled Port with standard Port.
–
Click Replace VLAN enabled Port with standard Port in the Network Actions panel.
–
Press the right mouse button and click Replace VLAN enabled Port with standard
–
Port from the shortcut menu.
99