Logging In; Using The Start-Up Wizard - D-Link DSN-1100 X Stack User Manual

2.1 Logging In

After confirming that the minimum system requirements in section 1.2 have been met, use
the following procedure to log in to the xStack Storage Management Center.
1. Start a Web browser on the PC connected to the xStack Storage management port.
2. In the browser's address bar, type the following default IP address and press the Enter
key: 192.168.1.1
One of the following actions occurs:
For your initial login, the start-up wizard appears and you should proceed to section
–
2.1.1.
For all subsequent logins, the home page appears and you should proceed to section
–
2.1.2.

2.1.1 Using the Start-up Wizard

The xStack Storage Management Center provides administrators with a straightforward, easy-
to-use start-up wizard for the initial configuration and setup of their storage environment.
The start-up wizard incorporates a series of intuitive point-and-click pages that start
automatically at initial login, guiding administrators through the first-time setup.
The start-up wizard greets administrators with the Welcome page in Figure 2-1.
10 Chapter 2 Getting Started
Figure 2-1. Welcome Page